Tag Archives: pulley parts

China Professional Pulley with Good Quality and Warranty 1 Year OEM 93297735 for Car Parts with Free Design Custom

Product Description

Pulley with Good Quality and Warranty 1 Year OEM 93297735 for Car Parts
Product Specification:

Parts OEM No.: 93297735
Apply To:

For CAR
Brand: FENGMING OR OEM
Condition: Brand New
Stock Availability: Yes
Minimum Order QTY 10PCS
OEM Order Acceptability: Yes
Small order Lead Time: 3-7 days
Large Order Lead Time: 15-30 days
Quality Warranty 12 months
PACKAGING As original or as customer’s request, FENG MING PACKING
Payment Methods: Paypal, Western Union, Bank T/T, L/C
Shipment Methods: DHL, UPS, TNT, FedEx, Aramex, EMS, Air Cargo, Sea Cargo


 

How to Repair a Timing Belt Tensioner

Your timing belt tensioner is a critical component of your vehicle’s drivetrain. Too little tension, for example, will cause the belt to slip, and too much tension can overload shaft bearings, leading to premature failure. If you notice that your belt tensioner is not working properly, you should immediately visit a mechanic. Corrosion from road splash, dirt, mud, or other debris can jam the tensioner housing. To avoid this, make sure that you replace your timing belt tensioner as soon as possible.
belt

Symptoms of a bad belt tensioner

If you’ve ever wondered what signs indicate a bad belt tensioner, look no further than your vehicle’s engine. Worn belts or a broken tensioner can cause an irritating squealing noise, as well as the belt to slip. Even worse, a bad tensioner can cause water to enter the belt and pulley, resulting in water damage. A worn tensioner is usually the culprit of the noise, but there are also other warning signs that a belt is in trouble.
Your vehicle’s engine may start to run poorly or even squeal when you turn the key. Similarly, your engine may fail to start at all, or the check engine light may illuminate. The belt may also start to wear out in an unusual pattern. These signs indicate that the tensioner is in need of replacement. If you notice 1 or more of these signs, get your car checked right away.
To check the condition of the tensioner, remove the drive belt and observe the pulley. You may notice rust dripping or bleeding at the mounting bolts, which are the most common signs of a bad tensioner. If you can’t remove the drive belt, check the pulley by rotating it. If you feel resistance, the pulley is likely worn or slack.
Failure of the belt tensioner will also cause other parts of the car to fail. If a bad belt tensioner isn’t fixed quickly, you might not be able to use the vehicle properly. You could end up breaking your car’s engine, losing power steering, and possibly even the water pump. If your car is not running right, you could be stuck in the middle of nowhere. Even if the alternator doesn’t work, you’ll still have a malfunctioning power steering system and a dead AC system.
A broken timing belt tensioner can cause strange noises or a no-start condition. These noises and symptoms are signs of a bad belt tensioner, and you’ll have to replace it ASAP. If you don’t know what symptoms mean, don’t hesitate to take your car to a mechanic. You’ll be surprised how easy it is to check this vital component and save yourself a bunch of money.

Components of a belt tensioner

The components of a belt tensioner assembly consist of 4 key components. The clearance between the pulley and the base is critical to the tensioner’s operation. If the tensioner is installed incorrectly, the spring can break and cause severe injury. The spring’s preload and powerful force make it difficult to service the unit safely. These parts are non-serviceable. If you are unsure of how to repair your tensioner, contact an authorized mechanic.
The components of a belt tensioner drive are shown in FIG. 2. The rotor shaft is connected to the drive screw, while the second transmission is connected to the gear shaft. The rotor and gear shaft are in parallel with each other. The gear shaft and worm wheel are connected to the belt tensioner drive. In other words, the belt tensioner drive is located in the B-pillar of the motor vehicle.
A belt tensioner may be equipped with a drive shaft and electric motor. The drive shaft may also contain a worm gear or worm wheel. The drive shaft also has an intermediate gearbox. Once the tensioner is set, it is ready to move to its safe-position position. It is a relatively simple and inexpensive replacement for your belt. When replacing a multi-ribbed belt, be sure to replace the tensioner along with the belt. Gates recommends replacing all wear parts at once.
In the event of a faulty drive belt tensioner, the belt will not stay taut. The pulley can wobble and cause the belt to fray. In addition to this, the bearings can cause a loud squealing noise. In this case, the accessory motors will continue to run, while the belt itself will not. Therefore, replacing the timing belt tensioner is an important part of maintaining the car.
In some systems, the belt tensioner uses a worm gear as the first gear. This results in rolling engagement of the screw’s teeth. This reduces noise and vibrations, while maximizing the efficiency of the belt tensioner drive. Additionally, a worm gear can eliminate the need for additional parts in belt tensioners. While this may not be practical in all instances, it is a good choice for space-constrained environments.
belt

Repair options for a timing belt tensioner

A timing belt tensioner is an essential part of an automobile’s timing chain and is responsible for ensuring proper timing. Proper alignment of timing marks is essential to the proper operation of the engine, and improper alignment may lead to damage to the engine. To repair a timing belt tensioner, there are several repair options available. First, you need to remove the engine cover. You can then remove the timing belt tensioner by loosening the pulley using a ratchet or breaker bar.
When the timing belt isn’t properly tensioned, the engine will misfire. The engine misfires when the valve opens and the pistons rise at the wrong time. When this happens, the timing belt cannot properly grip the gears and the engine will not function. If this part fails, you’ll have to replace the whole timing chain. However, if you are handy with tools, you can easily replace the entire timing belt tensioner yourself.
If your timing belt tensioner is out of alignment, you should replace it. If you’re not sure whether it needs to be replaced, check it with a professional and learn the details of the repair. The timing belt tensioner is the most critical part of the engine, so it’s important to know about it. Otherwise, your car won’t run as well as it could. Repair options for a timing belt tensioner will vary depending on the severity of the problem and how much damage it has done.
While there are several repair options for a timing belt tensioner, the average cost of replacement is $364 to $457, and this doesn’t take into account any tax or fee you may be charged. DIY repair methods will usually cost you $50 to $150, and you’ll likely save a lot of money in the process. However, you need to remember that you may be unable to do the job yourself because you don’t know how to use the proper tools and equipment.
While it is not difficult to replace a timing belt tensioner on your own, you should know that you’ll need to remove other parts of the engine as well as special tools to make the repair properly. This is an advanced repair job and requires a great deal of skill. If you’re new to home car repair, you may not want to attempt it yourself. There are many other options, such as hiring a mechanic.
belt

Installation instructions

While there are no universal installation instructions for belt tensioners, the manufacturer of your car may provide detailed instructions. Before attempting to replace your tensioner, read the manufacturer’s recommended procedures carefully. To install a new tensioner properly, unload the old 1 and take a picture or sketch of how the belt should be routed. Once the old tensioner is out, follow the manufacturer’s torque specifications. Make sure to unload and remove the belt from the tensioner, and follow the manufacturer’s torque specifications to install the new one.
If your car comes with a manual belt tensioner, you can follow the instructions. The manual will have a corresponding guide for installation. When installing a belt tensioner, make sure the manual clearly states the static tension for your particular model. Check that it is in line with the engine relief to ensure proper belt tension. You can then use a 6mm allen key to turn the tensioner clockwise and counterclockwise. Once it is in position, release the tensioner to operate. The belt tensioner should now apply the proper tension to your belt.
Before installing a new belt tensioner, make sure you read the manual completely. You should follow these steps carefully to avoid any problems with the tensioner. If the tensioner has failed, you must replace it immediately. A new belt tensioner will help you ensure proper performance of your accessory belt drive system. If you are installing a new multi-ribbed belt, you should replace the tensioner as well. However, it is important to note that replacing the belt tensioner is a complicated process and requires a mechanic to be able to safely remove the belt from the engine.
To install a second stage drive belt, walk the belt onto the input drive and generator. Ensure that the belt is seated properly in the grooves of the pulleys. Next, replace the input drive belt and right and left Drive Disk covers. Test the machine to ensure that it is working properly. If it doesn’t, replace the original drive belt. After installing the new belt, you may want to read the manual again to make sure it is in perfect condition.

China Professional Pulley with Good Quality and Warranty 1 Year OEM 93297735 for Car Parts with Free Design CustomChina Professional Pulley with Good Quality and Warranty 1 Year OEM 93297735 for Car Parts with Free Design Custom

China factory Low Price Auto Engine Parts Spare Alternator Clutch Pulley 27415-0W010 with Great quality

Product Description

Low Price Auto Engine Parts Spare Alternator Clutch Pulley 27415-0W571
Product Specification:

Parts OEM No.: 27415-0W571
Apply To:

For CAR
Brand: FENGMING OR OEM
Condition: Brand New
Stock Availability: Yes
Minimum Order QTY 10PCS
OEM Order Acceptability: Yes
Small order Lead Time: 3-7 days
Large Order Lead Time: 15-30 days
Quality Warranty 12 months
PACKAGING As original or as customer’s request, FENG MING PACKING
Payment Methods: Paypal, Western Union, Bank T/T, L/C
Shipment Methods: DHL, UPS, TNT, FedEx, Aramex, EMS, Air Cargo, Sea Cargo


 

What to Look for in a Belt Tensioner

If you notice the power steering, air conditioning, or power steering stops working, chances are that your belt tensioner has been compromised. A compromised belt tensioner can be completely destroyed overnight, or it can last for a long time before it breaks. Either way, you should never drive with a faulty belt tensioner. It’s far better to have it replaced before the engine shuts down completely. In addition, replacing a belt tensioner will prevent other complications, such as power steering or air conditioning, from occurring.
belt

Misaligned idler pulley

If the tensioner arm is not rotating freely or has an abnormal chirping noise, it could be the result of a misaligned idler pulley. If this is the case, replace the idler. If the idler does not move, you may need to adjust the accessory mount points or use a laser alignment tool. The tensioner arm is only 1 part of the tensioner.
A misaligned idler pulley on a belt tensioner is usually the cause of a squeaking noise. If this noise continues even after a replacement of the belt, it’s time to replace the whole belt. A misaligned idler pulley can also be the cause of premature belt wear. If the idler pulley is out of alignment, it could also cause the belt to wear too fast and lead to the premature failure of the timing belt.
The tensioner pulley is made of nylon, steel, or plastic. It may be flat or grooved. Before replacing it, check for any cracks, dents, or debris on the pulley’s surface. Plastic pulleys may have broken sidewalls. If the idler pulley is worn out, you might also notice squealing noises when the vehicle is in motion.
The misalignment of a belt is most pronounced when the span between the 2 pulleys is short. When the span is long, however, diagnosing the problem becomes more complicated. Small degrees of offset may not be visible to the naked eye, but a laser alignment tool can help identify these subtle variations. In order to identify a misaligned idler pulley on a belt tensioner, you must first determine its cause.
When the tensioner’s idler pulleys are out of line, a belt tensioner will not be able to properly adjust the torque that the belt is under. This may result in squealing noises. If this is the case, it is time to call a mechanic. He or she will be able to determine the cause and correct it. If you suspect the problem, your next step is to replace the idler pulley on the belt tensioner.
If the ribbed belt is not properly aligned, you may have a misaligned idler pulley. To fix the misalignment, locate the belt adjustment bolt underneath the hood. You should be careful not to damage the alternator or battery terminal while doing this task. If you do accidentally connect the battery positive to the earth, you might be able to damage the ribbed belt and ruin your vehicle’s timing.
Besides a misaligned idler pulley on the belt tensioner, another problem may be the alternator’s serpentine belt. If your car’s alternator belt is not aligned properly, you could have misaligned the alternator’s pulley or a worn-out bearing. Regardless of the cause of your problem, you should have the belt inspected.
belt

Bad idler pulley

Having a Bad Idler Pulley on a Belt Tensioner? If this sounds familiar, then it’s probably time to change it. Idler pulleys slowly take hits while the engine is running, causing the belt to wrap and bend. Eventually, the belt will slip, and a new idler pulley should be installed to ensure optimal tension. But before you spend a dime on a new one, let’s talk about what to look for.
Symptoms of a Bad Idler Pulley: If the noise persists, there is a problem with the idler pulley or its bearing. These parts wear out over time and may eventually cause a cracked idler pulley or serpentine belt. Not only will the idler pulley create an irritating noise, but it will also damage the belt itself, leading to overheating, stalled engine, and even damage the head gaskets. Thankfully, a Bad Idler Pulley on a Belt Tensioner is easily replaced and will only cost about $40.
Although the Idler Pulley is not the most popular component on a car, it’s a critical part that ensures that the engine runs smoothly. It’s easy to overlook this part, but its failure can make it impossible for your vehicle to operate at its optimal level. Moreover, a Bad Idler Pulley on a Belt Tensioner will cause your engine to malfunction, so it’s essential that you check it at regular intervals.
If you notice a squealing noise while driving, the Idler Pulley is likely the culprit. Because of friction between the engine belt and idler pulley, the engine belt rubs against the pulley, causing it to squeak and make a clicking noise. This squealing noise will continue until the problem is repaired or replaced. It’s time to start addressing the problem before it becomes too late.
If you notice the tensioner pulley moving away from the engine, it’s most likely that the pulley is malfunctioning. A belt that is loose or slack may make it difficult to start the car, or your engine may even overheat. If this occurs, it’s crucial to replace the Idler Pulley as soon as possible, because a Bad Idler Pulley on a Belt Tensioner can seriously damage your vehicle.
The Idler Pulley facilitates the motion of the engine belt. It serves as a smooth rotating point that allows the belt to loop without a barrier. Over time, this part of the system will begin to show signs of wear and tear, and replacement is vital to protect your engine, serpentine belt, and other accessories. An early warning sign of a problem is a squealing sound coming from the engine area.
belt

Broken tensioner arm

The belt tensioner is a piece of machinery that is used to keep the belt tight. If this part breaks, you can easily repair it yourself using a long-handled ratchet, serpentine belt tool, or a socket. To repair the tensioner, simply remove the drive belt from the pulley and rotate it to release tension. Check for roughness, resistance, or binding of the drive belt.
Noises caused by the tensioner are a sign of a damaged component or excessive oscillation. These noises are usually caused by worn internal components or the tensioner’s pivot bushing. In some cases, the vibration damping system or a worn-out alternator pulley could also be to blame. If this is the case, replace the pulley and tensioner together. To check the condition of your belt tensioner, follow these steps.
In addition to worn-out springs, a loose or broken pivot arm could be causing your belt to misalign. A worn-out tensioner pulley bushing will also cause vibrations, noise, and seizing. Lastly, a broken tensioner spring could be preventing the belt from maintaining proper tension. Broken springs are also prone to loss of tension due to heat. Damaged tensioner housing can also affect belt tension.
Once the belt is installed, you need to check the condition of the pulley and the tensioner arm. Make sure that the pulley is moving and that the arm is moving smoothly with the cranking and releasing. If the arm is wobbling, the tensioner is failing. If the pulley wobbles or excessive chattering occurs, the tensioner is failing. It can also be seized or jammed.
If the tensioner arm has broken, replace it. Replacing the tensioner can be a tedious task. Be sure to use a suitable tool to tighten the pulley and tensioner. If you are not sure of how to replace the pulley, try using a serp belt tool. Another good option is to purchase a 3/8 drive ratchet. If you don’t have this tool, you can use a long 3/8 extension and a deep socket.
The belt tensioner assembly can fall off the engine, causing damage to the timing belt. If you are replacing it, you must replace it with a new one, and tighten all of the mounting bolts before reinstalling it. To avoid further damage to the engine, ensure you replace the belt with a new tensioner and a new belt. The tensioner is bolted to the engine’s timing cover, so make sure you carefully tighten the bolts when replacing it.

China factory Low Price Auto Engine Parts Spare Alternator Clutch Pulley 27415-0W010 with Great qualityChina factory Low Price Auto Engine Parts Spare Alternator Clutch Pulley 27415-0W010 with Great quality

China factory Auto Parts Belt Tensioner Pulley 13540-50030 for Car with high quality

Product Description

Auto parts Belt Tensioner Pulley 13540-50030 for car

Product Name Auto parts Belt Tensioner Pulley 13540-50030 for car
Size OEM standard size
Color Picture
Quality High Level
Shipping SEA, AIR, DHL, EMS
Packing Neutral Packing, Original Packing, Customer Requirement
Payment PAYPAL, Western Union, T/T
Delivery Time Within 3 working days
MOQ 10 Pieces
Warrenty 12 months

What we can promise you?

 1. Manufacturing & Selling Integration
 2. Our companies located in HangZhou China which are in charge of different markets
 3. 1 Year warranty for Fengming brand products under normal use
 4. Unique Fengming brand packing: one Fengming poly bag plus one Fengming red box
 5. Competitive price with high & stable quality products
 6. Total 2,000 square meters warehouse to make sure fast delivery
 7. 10 years’ experience in researching, developing and supplying auto parts for Japanese cars since 2009

Customer Reviews:
95% positive testmonials from customers around the world. Fengming brand products’ quality, packing and Fengming service get excellent approval among customers. Seeing is believing!

Fengming Auto Parts CO., Ltd main products line:
Auto ignition system: Spark Plug, Ignition Coil
Suspension Parts: shock absorber, control arm, ball joint,stabilizer link, tie rod end, steering rack
Brake parts: brake pads, brake disc, brake master cylinder, wheel cylinder
Fuel pump, water pump, radiator, full gasket kit, engine belt

HangZhou Fengming Auto Parts CO., Ltd company profile:
HangZhou Fengming AUTO PARTS CO., LTD specializes in manufacturing and selling engine parts for Japanese cars, established in 2009. Fengming AUTO PARTS has developed more than 4000 different kinds of products for Japanese applications like Toyota, Honda, Nissan, Mitsubishi, Mazda and Subaru including brake pads,ignition coil, oxygen sensor, water pump, power steering rack, timing belt kit etc. We have been committed to providing high efficiency, quality guaranteed, long durability auto parts to our customers. Until now Fengming Auto Parts CO., Ltd has cooperated with many big factories such as Aisin,NGK,DENSO,KYB in order to meet customers’ needs in different countries. Now we have more than 200 workers with the production capacity of 50,000 to 100,000 sets every month. And we have built up warehouses total covering area 2,000 square meters in HangZhou China, thus, we are able to deliver goods to you promptly.

Choosing a V-Belt

When choosing a v-belt, you should understand the characteristics of each type and how they affect the performance of your machine. Listed below are the characteristics of Cogged, Narrow profile, and wide v-belts. Learn about the advantages and disadvantages of each. Choose the right v-belt for your machine to maximize its performance. Learn about the different materials used to make v-belts and how they influence the performance of your machine.
belt

Narrow v-belts

While the flat belts are the most common type of v-belt, narrow v-belts are also a common option for industrial applications. These belts are similar to wedge belts in that they transmit heavier loads, but in a smaller form. Narrow v-belts are typically designated as 3V, 5V, and 8V and are denoted by their top width, multiplied by an eighth of an inch. Narrow v-belt sections conform to a wedge belt profile and are usually standardized by manufacturers. For example, section 3V corresponds to a wedge-type profile, while section 5V corresponds to SPB.
Both narrow and conventional v-belts are made of rubber stocks, which are generally composed of polymer or synthetic rubber. Fabric materials may be used to cover the stock material, adding a layer of reinforcement and protection. Narrow v-belts have a higher power rating than traditional V-belts. This is due to their greater depth-to-width ratio, which puts more of the reinforcing cord beneath the sheave.
The Wedge TLP ™ Narrow V-belt from Continental features a homogeneous one-piece design for maximum strength and long-term performance. These belts feature a high-denier cord and can handle significant horsepower increases. These belts are ideal for industrial applications. However, they are not as durable as their wider counterparts. The Wedge TLP is also an excellent choice for heavy-duty industrial applications.

Cogged v-belts

A key benefit of cogged v-belts is their ability to increase power output without sacrificing reliability. These belts are designed with precision-engineered cogs, which allow them to fit into smaller pulleys without reducing power output. Their raw-edge sidewalls and specially formulated EPDM rubber compound also help provide grip power. Cogged v-belts are manufactured by Carlisle(r) and offer several advantages over conventional belts.
The performance benefits of Cogged V-Belts are widely acknowledged. The company uses added-strength EPDM compounds in their belts to help reduce downtime and energy consumption. They are ideal for demanding applications such as power transmission. These belts are available in a variety of sizes and cross-sections. The section number of Cogged v-belts is H3V, H4V, and H5V.
The main difference between cogged v-belts and wedge belts is in the contact angle. While wedge and cogged v-belts have the same contact angle, the design and construction differs. Cogged v-belts typically include top and bottom layers of rubber, dampening rubber, tension cords, and top and bottom metal rings. Polychloroprene and polyester cords are common materials for the top and bottom layers, while aramid fibers are used for punishing applications.
Cogged v-belts are more flexible than traditional v-belts. Because of the slots on the belt surface, they reduce bending resistance. They are compatible with the same pulleys as standard v-belts, and run cooler and longer. They are also more efficient than standard V-belts. If you are considering a cogged V-belt for your application, it may be worth it to investigate the benefits of this belt type.
belt

Wide v-belts

Variable-speed v-belts are wider in cross section than classical v-belts. The design of variable-speed v-belts varies depending on the manufacturer, but generally features a parallel top and bottom surface. This type of v-belt wedges tightly into its pulley’s grooves, reducing power loss and slippage. This type of v-belt is best suited to applications where speed changes frequently.
High-performance Wide V-belts feature a fibre-reinforced EPDM rubber base. The resulting supercharged EPDM mix is better suited for applications where the belts are subject to higher temperatures. This type of drive belt can also replace existing drives with ease and efficiency. CZPT offers a wide range of drive belts for all applications. For applications where slack is an issue, wrapped V-belts are a smart choice.
Narrow-V-belts, on the other hand, have a more favorable height-to-width ratio. This means that a narrow-V belt can be smaller while still providing the same power transmission. These belts also have a lower mass, which reduces centrifugal forces and enables higher speeds. However, narrow-V-belts are prone to wear, but are still a popular choice in many applications.
In addition to being more durable, wrapped-V-belts have fabric-coated edges for better heat resistance. The material covering wrapped-V-belts also protects them from damage from friction and external contaminants. Unlike their rigid counterparts, these wide-V-belts have an improved lifespan and require less maintenance and downtime. These are excellent alternatives to conventional v-belts. So, what are the benefits of Wide-V-belts?

Narrow profile v-belts

When it comes to choosing the best V-belt for your needs, it is important to understand the differences between narrow profile and classical. Narrow profile V-belts are generally narrower in cross-section than classical v-belts. This makes them ideal for high-speed compact drives and light-duty applications. The following section details the differences between narrow and classical v-belts.
The tensile cords, or “cords,” are embedded into the rubber compound. These cords are the main power-transmitting component of a narrow profile v-belt. The tension cords are located at the pitch diameter of the belt cross-section and increase the tensile strength. They are typically made of steel, aramid fibers, or polyester. The core is usually made of polyurethane, but other materials can be used.
When measuring the v-belt’s width, it is important to understand the various sign-codes. Some v-belts have the wrong sign-coding schema. For example, a classical profile belt should be read as Lw = 3522 mm, while a narrow profile belt should be read as La=3553mm. A narrow profile v-belt has a steeper side-wall, which increases the wedging action. Moreover, the narrow profile v-belt has higher load capacity.
Despite their name, narrow profile v-belts are the most widely used and versatile type of v-belts. They are also the easiest to install. Their general size is similar to that of a wedge, and their number is derived from their numerical prefix. A narrow profile v-belt with a 3L300 part number is 3/8″ wide and 300.0 inches long.

Wide profile v-belts

Wide profile v-belts are designed for heavy-duty applications where extreme performance is required. They are ideal for such applications due to their high-flexural strength and shock-resistance. They also come with many benefits, including good noise-reduction, increased sturdiness, and easy maintenance. This article explores the features of wide profile v-belts and how they can benefit your business.
Classical v-belts have an internal dimensional metric marking called the “CZPT.” This identifies each specific belt. Generally, this number is a combination of the normal profile size designation letter and the internal length in inches. The inside length of the v-belt is indicated on the index of the v-belt. To begin installing the v-belt, mark the floor where it will be hung. Tape the end stop marker to the first stick.
Narrow v-belts are narrower than standard wide v-belts. They are also available in raw-edge cogged profiles and are intended for light-duty applications. Narrow V-belts are also available in 4 sizes. Compared to standard wide profile v-belts, narrow v-belts are most appropriate for high-speed, compact drives. However, wide profile v-belts are generally longer than narrow V-belts.
A v-belt is composed of different types of rubber and reinforcements. It undergoes tensile and compressive stresses on both sides. The top side of a v-belt experiences longitudinal tensile force, while the bottom side is subjected to compression against a pulley. Moreover, the included angle of a v-belt section is 40 deg. Various types of v-belts are available according to their cross-sections and performance specifications.
belt

Standard v-belts

If you are installing v-belts, you must know the right way to measure them. Many v-belts are mislabelled as classic or SPA. If you are unsure of which 1 to choose, you can refer to the standard v-belts index. The basic way to measure v-belts is by using a measuring tape or a cable tie. Using the right technique will ensure you get the right length.
A well-engineered V-belt is made from an elastomer core, which is a material that is resistant to abrasion. The elastomer core is usually composed of polyurethane, which has excellent flexural strength and shock resistance. In addition to the elastomer core, a fabric cover protects the core from wear and environmental forces. Its fabric cover is treated to form a chemical bond with the belt core, which increases the fabric’s resistance to constant bending.
The cross-section of a standard V-belt is commonly described as a trapezium, with its top and bottom sides parallel. Knowing the cross-section of a standard V-belt is essential in matching it with a pulley. It is also important to know how the v-belt is positioned on a pulley and how to select the right belt for the job.

China factory Auto Parts Belt Tensioner Pulley 13540-50030 for Car with high qualityChina factory Auto Parts Belt Tensioner Pulley 13540-50030 for Car with high quality

China Hot selling 1761930 Auto Parts Belt Tensioner Pulley Cm5q 6A228 Ba for CZPT Focus Fiesta Vkm34119 with Free Design Custom

Product Description

 

Detailed Photos

1761930 Auto Parts Belt Tensioner Pulley CM5Q 6A228 BA For CZPT Focus Fiesta VKM34119

Tensioner Pulley, V-ribbed belt VKM 34119

Diameter: 65 mm
Width: 24 mm
Tensioner Pulley Actuation: Automatic

Belt Tensioner, belt tensioner pulley, timing belt tensioner, automatic belt tensioner, belt pulley, timing pulley, idler pulley, engine pulley, idler pulley assembly, tensioner & idler pulley, belt idler pulley, drive belt idler, pulley, tensioner.

OEM Number:

FORD
1761930
2431347
CM5Q6A228BA
CM5Q-6A228-BB
 

Reference Number:

654993
03.81828
APV3170
T39295

153988
3146SR
57121
VKM 34119
GA352.87
950652
 

Application:

 

 
 FORD B-MAX (JK) 1.0 EcoBoostMPV2016 -140 / 103YYJC
 FORD B-MAX (JK) 1.0 EcoBoostMPV2012 -1.2 VKBA523 482A/472 VKBA 5038 35BWD16 VKM14103

 

Company Profile

ZheJiang Mighty Machinery Co. Ltd is a professional manufacturer of auto bearings for more than 20 years. We provide a one-stop service for our customers. Our main products include wheel bearings & hub assembly, belt tensioners, clutch release bearings, and other parts.

Relying on the professional and rich manufacturing experience and many substantial factories which stable cooperated for many years, Mighty suppliers customers high-quality products at very competitive prices.

 

Customer’s satisfaction is our First Priority, We adhere to the concept of ” Quality First, Customer First”. We will continue to provide high-quality products and the best services to our customers and build up CZPT long-time friendship partners.

 

Our Advantages

More than 20 years of manufacturing and exporting experience
OEM manufacturing available
Full range, large stock
Quickly feedback
One year warranty
One-stop service
On-time delivery

Packaging & Shipping

FAQ

1. What’s the minimum order quantity?

We don’t have the minimum order quantity. We can also provide free samples, but you need to pay the freight.

     
 2. Do you provide ODM&OEM order service?

Yes, we provide ODM&OEM services to customers around the world, and we can customize different brands and different sizes of packaging boxes according to customers’ requirements.

     
3. After-sales service and warranty time

We guarantee that our products will be free from defects in materials and workmanship within 12 months from the date of delivery. The warranty is void due to improper use, incorrect installation, and physical damage.
 

4. How to place an order?

Send us an email of the models, brand, quantity, consignee information, model of transportation, and payment
Confirm payment and arrange the production.
 

5. What are your packing conditions?

We use standardized export packaging and environmental protection packaging materials. If you have a legally registered patent, we will package the goods in your brand box after receiving your authorization

6. What are your payment terms?

T/T is 30% of the payment in advance and 70% balance before delivery. Before you pay the balance, we will show you photos or videos of the products and packaging.
 

7. How long is your delivery time?

The delivery time of sample order is 3-5 days, and that of a batch order is 5-45 days. The exact delivery time depends on the item and the quantity you ordered.
 

8. Do you test all products before delivery?
Yes, according to ISO standards, we have professional Q/C personnel, precision testing instruments, and an internal inspection system. We control the quality of every process from material receiving to packaging to ensure that you receive high-quality products

 

How to Repair a Timing Belt Tensioner

Your timing belt tensioner is a critical component of your vehicle’s drivetrain. Too little tension, for example, will cause the belt to slip, and too much tension can overload shaft bearings, leading to premature failure. If you notice that your belt tensioner is not working properly, you should immediately visit a mechanic. Corrosion from road splash, dirt, mud, or other debris can jam the tensioner housing. To avoid this, make sure that you replace your timing belt tensioner as soon as possible.
belt

Symptoms of a bad belt tensioner

If you’ve ever wondered what signs indicate a bad belt tensioner, look no further than your vehicle’s engine. Worn belts or a broken tensioner can cause an irritating squealing noise, as well as the belt to slip. Even worse, a bad tensioner can cause water to enter the belt and pulley, resulting in water damage. A worn tensioner is usually the culprit of the noise, but there are also other warning signs that a belt is in trouble.
Your vehicle’s engine may start to run poorly or even squeal when you turn the key. Similarly, your engine may fail to start at all, or the check engine light may illuminate. The belt may also start to wear out in an unusual pattern. These signs indicate that the tensioner is in need of replacement. If you notice 1 or more of these signs, get your car checked right away.
To check the condition of the tensioner, remove the drive belt and observe the pulley. You may notice rust dripping or bleeding at the mounting bolts, which are the most common signs of a bad tensioner. If you can’t remove the drive belt, check the pulley by rotating it. If you feel resistance, the pulley is likely worn or slack.
Failure of the belt tensioner will also cause other parts of the car to fail. If a bad belt tensioner isn’t fixed quickly, you might not be able to use the vehicle properly. You could end up breaking your car’s engine, losing power steering, and possibly even the water pump. If your car is not running right, you could be stuck in the middle of nowhere. Even if the alternator doesn’t work, you’ll still have a malfunctioning power steering system and a dead AC system.
A broken timing belt tensioner can cause strange noises or a no-start condition. These noises and symptoms are signs of a bad belt tensioner, and you’ll have to replace it ASAP. If you don’t know what symptoms mean, don’t hesitate to take your car to a mechanic. You’ll be surprised how easy it is to check this vital component and save yourself a bunch of money.

Components of a belt tensioner

The components of a belt tensioner assembly consist of 4 key components. The clearance between the pulley and the base is critical to the tensioner’s operation. If the tensioner is installed incorrectly, the spring can break and cause severe injury. The spring’s preload and powerful force make it difficult to service the unit safely. These parts are non-serviceable. If you are unsure of how to repair your tensioner, contact an authorized mechanic.
The components of a belt tensioner drive are shown in FIG. 2. The rotor shaft is connected to the drive screw, while the second transmission is connected to the gear shaft. The rotor and gear shaft are in parallel with each other. The gear shaft and worm wheel are connected to the belt tensioner drive. In other words, the belt tensioner drive is located in the B-pillar of the motor vehicle.
A belt tensioner may be equipped with a drive shaft and electric motor. The drive shaft may also contain a worm gear or worm wheel. The drive shaft also has an intermediate gearbox. Once the tensioner is set, it is ready to move to its safe-position position. It is a relatively simple and inexpensive replacement for your belt. When replacing a multi-ribbed belt, be sure to replace the tensioner along with the belt. Gates recommends replacing all wear parts at once.
In the event of a faulty drive belt tensioner, the belt will not stay taut. The pulley can wobble and cause the belt to fray. In addition to this, the bearings can cause a loud squealing noise. In this case, the accessory motors will continue to run, while the belt itself will not. Therefore, replacing the timing belt tensioner is an important part of maintaining the car.
In some systems, the belt tensioner uses a worm gear as the first gear. This results in rolling engagement of the screw’s teeth. This reduces noise and vibrations, while maximizing the efficiency of the belt tensioner drive. Additionally, a worm gear can eliminate the need for additional parts in belt tensioners. While this may not be practical in all instances, it is a good choice for space-constrained environments.
belt

Repair options for a timing belt tensioner

A timing belt tensioner is an essential part of an automobile’s timing chain and is responsible for ensuring proper timing. Proper alignment of timing marks is essential to the proper operation of the engine, and improper alignment may lead to damage to the engine. To repair a timing belt tensioner, there are several repair options available. First, you need to remove the engine cover. You can then remove the timing belt tensioner by loosening the pulley using a ratchet or breaker bar.
When the timing belt isn’t properly tensioned, the engine will misfire. The engine misfires when the valve opens and the pistons rise at the wrong time. When this happens, the timing belt cannot properly grip the gears and the engine will not function. If this part fails, you’ll have to replace the whole timing chain. However, if you are handy with tools, you can easily replace the entire timing belt tensioner yourself.
If your timing belt tensioner is out of alignment, you should replace it. If you’re not sure whether it needs to be replaced, check it with a professional and learn the details of the repair. The timing belt tensioner is the most critical part of the engine, so it’s important to know about it. Otherwise, your car won’t run as well as it could. Repair options for a timing belt tensioner will vary depending on the severity of the problem and how much damage it has done.
While there are several repair options for a timing belt tensioner, the average cost of replacement is $364 to $457, and this doesn’t take into account any tax or fee you may be charged. DIY repair methods will usually cost you $50 to $150, and you’ll likely save a lot of money in the process. However, you need to remember that you may be unable to do the job yourself because you don’t know how to use the proper tools and equipment.
While it is not difficult to replace a timing belt tensioner on your own, you should know that you’ll need to remove other parts of the engine as well as special tools to make the repair properly. This is an advanced repair job and requires a great deal of skill. If you’re new to home car repair, you may not want to attempt it yourself. There are many other options, such as hiring a mechanic.
belt

Installation instructions

While there are no universal installation instructions for belt tensioners, the manufacturer of your car may provide detailed instructions. Before attempting to replace your tensioner, read the manufacturer’s recommended procedures carefully. To install a new tensioner properly, unload the old 1 and take a picture or sketch of how the belt should be routed. Once the old tensioner is out, follow the manufacturer’s torque specifications. Make sure to unload and remove the belt from the tensioner, and follow the manufacturer’s torque specifications to install the new one.
If your car comes with a manual belt tensioner, you can follow the instructions. The manual will have a corresponding guide for installation. When installing a belt tensioner, make sure the manual clearly states the static tension for your particular model. Check that it is in line with the engine relief to ensure proper belt tension. You can then use a 6mm allen key to turn the tensioner clockwise and counterclockwise. Once it is in position, release the tensioner to operate. The belt tensioner should now apply the proper tension to your belt.
Before installing a new belt tensioner, make sure you read the manual completely. You should follow these steps carefully to avoid any problems with the tensioner. If the tensioner has failed, you must replace it immediately. A new belt tensioner will help you ensure proper performance of your accessory belt drive system. If you are installing a new multi-ribbed belt, you should replace the tensioner as well. However, it is important to note that replacing the belt tensioner is a complicated process and requires a mechanic to be able to safely remove the belt from the engine.
To install a second stage drive belt, walk the belt onto the input drive and generator. Ensure that the belt is seated properly in the grooves of the pulleys. Next, replace the input drive belt and right and left Drive Disk covers. Test the machine to ensure that it is working properly. If it doesn’t, replace the original drive belt. After installing the new belt, you may want to read the manual again to make sure it is in perfect condition.

China Hot selling 1761930 Auto Parts Belt Tensioner Pulley Cm5q 6A228 Ba for CZPT Focus Fiesta Vkm34119 with Free Design CustomChina Hot selling 1761930 Auto Parts Belt Tensioner Pulley Cm5q 6A228 Ba for CZPT Focus Fiesta Vkm34119 with Free Design Custom

China Professional Auto Parts Idler Pulley 1340513 1340535 90409238 93297272 for Chevrolet Opel Vauxhall with Best Sales

Product Description

Products Description

 

Product Name

 Auto Parts Idler Pulley 134571 134571 90409238 93297272 For CHEVROLET OPEL VAUXHALL
Certification ISO/TS16949:2 90409238 93297272
Car Fitment

CHEVROLET (SGM)

SAIL Estate [2005-2008]SAIL Saloon [2001-2015]

OPEL

ASTRA F (T92) [1991-1998]ASTRA F Convertible (T92) [1993-2001]ASTRA F Estate (T92) [1991-1998]ASTRA F Hatchback (T92) [1991-1998]ASTRA F Van (T92) [1991-1999]COMBO (71_) [1994-2001]CORSA B (S93) [1993-2002]CORSA B Box (S93) [1994-2001]OMEGA A (V87) [1986-1994]OMEGA A Estate (V87) [1986-1994]SENATOR B (V88) [1987-1993]TIGRA (S93) [1994-2000]

VAUXHALL

ASTRA Mk III (F) Convertible (T92) [1991-2001]ASTRA Mk III (F) Estate (T92) [1991-1998]ASTRA Mk III (F) Hatchback (T92) [1991-1998]ASTRA Mk III (F) Saloon (T92) [1991-1998]ASTRA Mk IV (G) Estate (T98) [1998-2005]ASTRA Mk IV (G) Hatchback (T98) [1998-2005]ASTRA Mk IV (G) Saloon (T98) [1998-2005]ASTRAVAN Mk III (F) (T92) [1991-1998]ASTRAVAN Mk IV (G) (T98) [1993-2006]CARLTON Mk III Estate (V87) [1986-1994]CARLTON Mk III Saloon (V87) [1986-1994]CAVALIER Mk III Hatchback (J89) [1988-1995]

Quality guarantee

12 months

Leading time

30 days

MOQ

50pcs

Our Advantages

1. Factory direct wholesale, premium quality and lower price.

2. About 500 items, new products will be developed every year to meet customers’ requirements
3. Full Inspection before shipment
4. Most of the items are in stock can be dispatched immediately.

5. Easy to replace and install.

6. Patient & friendly aftersale services.
7. Small orders are acceptable.

Our Workshop

 

 

Packing & Delivery

 

 

Why Choose US

 

FAQ
1. Is the product fit to your car model?
Please check if the parts are suitable for your model before purchase.
Or please tell us your Car Model and OE Number, and tell us the product name.

2. What you can supply to me?
We could supply all kinds of auto spare parts and accessories. Besides ,we provide OEM service, shipping service and QC service as well to make sure you get ONE-STOP purchase process from us.

3. Can you customize the products as per our request?
Yes, we do OEM and ODM. We could make the product suggestion based on your idea and budget.

4. How to get a sample from you?
All samples will be free if unit cost under 20USD,but the freight should be on your side. If you have express account like DHL,UPS etc we will send you directly, if you don’t have you can send express cost to our paypal account, any sample cost could be returned when you make order.

5. What’s your payment term?
We usually doing 30% deposit and 70% balance against copy of B/L by T/T, We also accept L/C ,D/P if total amount over $30000.

Welcome to your inqury now and built a long cooperatitive relationship with our professional service.

Windy Zhang

What Is a V-Belt?

What is a v-belt? It is a rubber belt that is trapezium-shaped and has an elastomer core that holds the parts together. Its elastomer core is generally made of polyurethane and has good shock resistance and flexural strength. V-belts sometimes have 2 sections, 1 of which is a compression rubber and the other cushion rubber. They can be narrow or wide, depending on their use.
belt

Classical V-belts replace leather belts

Classical V-belts are a popular choice among truck drivers because they are more durable. They are typically made of polymer or rubber, with fibers from other materials added for reinforcement. These belts are a good replacement for leather belts and offer many benefits. They are durable, offer excellent temperature and oil resistance, and are easy to use. If you’re considering replacing your current belt, consider buying a replacement belt made of the same material.
Most classical V-belts are used individually and come in A and B sizes. They are rarely used in single-belt drives. Buying several A or B belts instead of 1 C belt can save money. The narrow V-belts also provide higher power ratings. This is due to their narrow profile, which places more of the reinforcing cord under the sheave. Narrow V-belts are ideal for heavy duty applications.
When you’re replacing an existing V-belt, you’ll need to measure its top width and circumference. Once you’ve determined these parameters, you’ll be able to select the right replacement belt. Make sure to take measurements of the belt’s dimensions and top width before ordering. Using these measurements will help you determine the best size for your new belt. You’ll be able to tell whether you need a larger or smaller belt after measuring the top width and circumference.
If you’re looking to replace your leather belt with a belt made of synthetic material, a Classical V-belt may be the right choice. Classical V-belts are available in many materials and are more durable than leather. And because they are so versatile, they are the perfect replacement for your current belts. You’ll be glad you did. So, don’t be afraid to experiment with this type of belt. They’ll work well in any setting, including heavy equipment.
When buying a Classical V-belt, be sure to check the dimensions and type of belt you choose. These are available in notched or cogged designs. Notches are a great way to reduce bending stress. Notches also help dissipate heat from the belt, a major factor in premature belt failure. Notched V-belts are designed to balance a combination of flexibility and tensile cord support. They are spaced properly to minimize cracking and undercord damage.
Unlike leather belts, Classical V-belts are made of synthetic materials. They are easy to install, have a wide range of sizes, and come in light to heavy-duty varieties. The V-belt’s trapezoidal shape helps it track in the grooves of pulleys and prevents it from slipping while in use. It also helps in reducing power loss, since it’s easier to grip the pulleys than leather.
belt

Narrow v-belts are more efficient

There are 5 basic types of V-belts. Their differences in cross-sectional size and power transmission make them superior to multiple single v-belts. The diagram below shows these types and how each differs from 1 another. The included angle of each belt is 40 degrees. The lower number indicates the more efficient version. Narrow V-belts are generally less expensive. Narrow v-belts are generally more efficient than wider belts.
There are several factors that influence a V-belt’s efficiency. Although the efficiency is high when a new belt is installed, the efficiency can drop to the low nineties. However, these belts are relatively resilient, and even with lower efficiency can function properly. Even if the efficiency of a V-belt is lower than it could be, it will still function. In fact, the higher the efficiency, the more energy it will save.
The first is the type of pulley. A narrow V-belt is more flexible than its wider counterpart. The belt pitch diameter is 32deg or 38deg. In addition, the belt can be cogged for added flexibility. In this way, the belt will not touch the bottom of the groove, but will only contact the inclined flanks. Without this wedge effect, the belt’s total friction force is higher. This means that it can transfer higher forces.
While a V-belt looks like a glorified rubber band, it has undergone tremendous technological development since it was first used in 1917. Synthetic rubber compounds and other cover materials have replaced rubber in the belt. New construction methods, tensile cord improvements, and cross-section profiles have resulted in a confusing variety of V-belts. Their differences, however, are based on the type of application for which they’re used.
Another type of V-belt is the raw edge variety. This type of belt is commonly used in manufacturing facilities. This type of belt requires less energy to operate. The raw edge also resists hardening. This is important since unmatched flexibility results in a smooth belt. Also, notched V-belts reduce vibration by 80%. Further, angular misalignment increases the risk of premature failure of a V-belt.
These belts differ in their overall design. While conventional V-belts are more common, narrow V-belts are more efficient and versatile. They are made of different types of rubber and reinforcements, which combine to create a trapezium-shaped cross-section. They can handle fractional loads and even 500 horsepower. Furthermore, their durability is largely dependent on their ability to withstand poor operating conditions.
Double-sided v-belts have unique features. These belts are used in applications with multiple pulleys. They can be operated clockwise or counter-clockwise. They can also be used to drive around multiple reverse bends. Further, they are more efficient and quieter than their counterparts. Finally, double-sided v-belts have 2 compression cores. The tension cord runs through both sections.
belt

Double cogged v-belts increase lateral rigidity to reduce belt whip

A double cogged v-belt is a hybrid of a traditional double versus a cogged vee-belt. These belts are useful for applications that require a large amount of flexibility without compromising durability. The double cogged design also allows the belt to follow a serpentine path. The varying dimensions of a double cogged v-belt depend on manufacturer standards.
A v-belt is measured by defining the centerline, the inside length of the v-belt, and the pitch line, which is the distance between the top and bottom sides of the trapezium. The width and height of a v-belt are defined by its cross-section. Each cross-section is given a different designation, including the width and height.
A standard V-belt is a v-belt with a fabric cover. It provides firmness in a smaller space and is less prone to belt whip when used in heavy-duty applications. Its slim profile and light gauge tensile cord make it suitable for many industrial applications. The standard length of a double cogged v-belt varies from 530 to 3,000 mm.
Single cogged v-belts are commonly used in manufacturing machines that operate in close proximity to 1 another. Single cogged v-belts increase lateral rigidity and reduce belt whip. They are also ideal for heavy-duty applications, such as in mining or quarrying. Double cogged v-belts also increase lateral rigidity to minimize belt whip.
The elastomer core of a v-belt is surrounded by tension cords. These tension cords are embedded into the rubber compound, creating a composite structure that provides a high degree of shock resistance and flexural strength. The tension cords are often made of steel, polyester, or aramid fibers. This material makes it much stronger and more durable.
A double cogged v-belt is a highly rigid option for applications where lateral rigidity is an important concern. The double cogged design also increases lateral rigidity to reduce belt whip and enhances power transmission efficiency. Double cogged v-belts also offer positive slip-proof engagement. These belts are also easier to maintain, require less maintenance, and require no lubrication.

China Professional Auto Parts Idler Pulley 1340513 1340535 90409238 93297272 for Chevrolet Opel Vauxhall with Best SalesChina Professional Auto Parts Idler Pulley 1340513 1340535 90409238 93297272 for Chevrolet Opel Vauxhall with Best Sales

China high quality Chinese Supplier Auto Parts Tensioner Pulley for Vigo OEM 88440-26090 with Free Design Custom

Product Description

Chinese Supplier Auto Parts Tensioner Pulley for Vigo OEM 88440-26090

Product Specification:

OEM No 88440-26090
Car Make

For CAR
Brand FENGMING
 
Condition Brand New
 
Stock Availability Yes
 
Minimum Order QTY 10PCS
 
OEM Order Acceptability Yes
 
Small order Lead Time 3-7 days
 
Large Order Lead Time 15-30 days
 
Quality Warranty 12 months
 
PACKAGING As neutral or as customer’s request, FENG MING PACKING
 
Payment Term Paypal, Western Union, Bank T/T, L/C
 
Shipment Term DHL, UPS, TNT, FedEx, Aramex, EMS, Air Cargo, Sea Cargo

 

How to Tell If Your Timing Belt is Worn Out

The timing belt is a component of your engine that consists of special materials that coordinate the rotational movement of your camshaft and crankshaft. This synchronization is vital for sustainable combustion. In addition to being vital for the proper operation of your engine, the belt is also responsible for setting the pace at which it will turn. Timing belts must be extremely strong and resilient, able to maintain a high degree of synchronicity, and operate effectively even in the most severe conditions.
belt

Problems caused by a worn-out timing belt

A worn-out timing belt can cause misfiring. Because the belt controls the movement of the pistons in the engine, it’s critical that it’s functioning properly. Misfires can cause serious engine damage and should be fixed as soon as possible. But how do you know if your timing belt is worn out? Here are 3 of the most common symptoms of a worn-out belt.
A car engine will misfire if the timing belt is broken, which could lead to severe damage. A broken belt may also cause excessive smoke to be produced by the exhaust system. If these symptoms are present, it’s time to take the car in for a timing belt replacement. A worn-out belt will affect the performance of your car. It will also affect the engine’s starting speed. When it’s time to replace it, you should do it now to avoid future problems.
Misfiring and premature cylinder closing are 2 of the most common symptoms of a worn-out timing belt. A worn-out belt can cause permanent engine damage. Because the timing belt contains teeth that grip the gears, it can slip. If the timing belt slips, the teeth can fall into the gears, causing the engine to misfire. Worn-out timing belts can also cause the engine to stall.
Engine ticking is another common sign of a worn-out timing belt. It can also be caused by low oil pressure. When oil pressure drops, the timing belt will become loose and cause a ticking sound. You should replace the timing belt as soon as it’s damaged. But it’s not enough if you don’t notice any of these signs right away. If the ticking sound continues, you’ll probably have an engine-related problem.

Types of timing belts

Timing belts are made of special materials that help the engine synchronize the crankshaft’s rotation with the camshaft’s. This precision is vital for the combustion process, as it ensures the proper opening and closing of the valves within the combustion chamber. The belts control the engine’s pace, which is why they must be strong enough to maintain synchronicity and operate at high speeds. However, timing belts do not come cheap, so there are several factors that you should be aware of before buying one.
First, timing belts come in different pitch sizes. A typical metric pitch is 5 millimeters, but some manufacturers use a higher or lower pitch. The pitch determines how much tension the belt will be able to carry and whether or not it will wear out prematurely. Other pitch sizes are more common. Timing belts come in 3 different widths, and they all have different tooth profiles. To find the right 1 for your engine, you need to know the pitch.
Modified curvilinear belts are made of 2 different types of materials. They combine the strengths of trapezoidal and curvilinear belts. The outer surface of these belts has a steeper angle than the belt’s teeth, which means that the power transmitted by the motor is much higher. Consequently, they are the primary choice for high-performance industrial applications. A synchronous timing belt is ideal for applications where precise synchronization of the driven and driver shafts is important.
Spliced and welded timing belts are used in many general applications. These belts typically have no joints or weak points and are more durable. These types of timing belts are also made with a smooth back and sealed edges. If you need a custom length or shape, these can also be manufactured. Then, you can order them for your exact measurements. When you need a new timing belt, you can simply ask for a quote and order 1 online.
belt

Common problems

Timing belts are a crucial part of your car’s drive system, and improper installation can cause a whole host of issues. It is also susceptible to crimping and premature wear. In either case, it is vital to take action early to prevent excessive engine wear and extend the life of the timing belt. Here are some common problems with timing belts. You may be surprised to learn that these problems are often caused by common car maintenance practices.
Regardless of the cause of the problem, a worn or faulty timing belt will affect the engine’s timing. This may result in misfires or excessive exhaust release. Engine misfiring is a serious sign that something is amiss. Depending on the extent of the problem, it could even lead to engine damage. If you experience erratic performance or excessive smoke, it’s likely the timing belt is faulty. Here are some common problems with timing belts and their causes.
Engine misfire is a common warning sign that your timing belt is wearing. This occurs when the timing belt slips off the gears or camshaft, causing the cylinder to open too early. If you notice this problem, take immediate action by visiting your mechanic immediately. Moreover, timing belt failures can cause a large amount of damage to your car’s engine, so it is essential to have your timing belt replaced in time.
Improperly adjusting the tension of your timing belt can also lead to serious problems. This can cause excessive wear on your engine’s pistons and valves, and damage the engine. Ultimately, a damaged timing belt may result in an expensive engine rebuild. While this might seem like a good option, it is not always the most practical solution. Ultimately, your car’s timing belt will wear down if you don’t fix these problems immediately.

Symptoms of a worn-out timing belt

If your car’s engine makes a high-pitched squeal when you start or run it, you may be experiencing a worn-out timing belt. You can check the belt by opening the hood and listening closely to the noise. You may also notice uneven RPM counts. The squealing sound can be caused by a number of factors, such as low oil pressure, engine lubrication problems, or even the timing belt.
If your car is exhibiting these symptoms, then it’s time for a replacement. A timing belt breaks down while your engine is running, and this can cause major engine damage. The timing belt is connected to the crankshaft and camshaft by a belt that keeps the 2 parts in sync rotation. When the timing belt wears out, it may cause a jump in the belt’s tooth, causing cylinders to open and close randomly, resulting in blow-by.
A timing belt is crucial to the functioning of your car’s engine. It synchronizes the engine rotation system and opens and closes the valves at the right time. Because it is subject to great forces inside the engine, the belt must be replaced at some point. Every vehicle needs a new timing belt at least once in its lifecycle. But what are the symptoms of a worn-out timing belt?
The timing belt is crucial to your car’s performance, so if you notice any of these signs in your vehicle, you should make an appointment with a qualified mechanic. The best way to tell if your timing belt needs to be replaced is to visually inspect the belt. You can visually inspect the belt while the engine is off, and if you notice it’s sagging, you should replace it.
belt

When to replace a timing belt

A timing belt is an essential part of your vehicle’s engine and is responsible for synchronizing the rotation system, allowing the valves to open and close at the correct time. Due to its constant use and great forces inside the engine, timing belts must be replaced at some point. The recommended interval for timing belt replacement is anywhere from 60,000 to 150,000 miles. In most cases, timing belt replacement is recommended for vehicles between 6 and 10 years old.
Costs for a timing belt replacement can vary widely depending on the make and model of your vehicle. The labour and parts used for timing belt replacement are relatively inexpensive, but you’ll have to remove several parts of your engine to access them. Timing belt replacement also involves replacing the water pump, which is driven by the timing belt. These other parts will be replaced with new ones, but the overall cost of the repair depends on the type of car you drive.
A timing belt is a thin, rubber piece that runs along the front of the engine. It’s responsible for synchronizing the valves and camshafts and is an important component of an engine. The belt’s custom teeth make it easy to see when it’s time to replace your car’s timing belt. Oftentimes, car manufacturers recommend timing belt replacement every 2 to 4 years or 50,000 miles, and they’re not the only ones who recommend it.
A professional mechanic can replace the timing belt and water pump in 1 service, saving you both time and money. Timing belt replacement is an intricate task and can last anywhere between 4 and 8 hours, depending on the make and model of your car. However, it is worth it if you can get your vehicle into a garage or repair shop sooner rather than later. You can save a lot of money on labor costs by replacing your timing belt and water pump yourself.

China high quality Chinese Supplier Auto Parts Tensioner Pulley for Vigo OEM 88440-26090 with Free Design CustomChina high quality Chinese Supplier Auto Parts Tensioner Pulley for Vigo OEM 88440-26090 with Free Design Custom

China Best Sales 51958007431 Tensioner Pulley for Man Truck Parts with Hot selling

Product Description

Inner Diameter: 26 mm
Outer Diameter: 35 mm
Width: 37 mm
Weight [kg]: 0.477 kg

———————————————————————————————————————————————-
COMPANY INTRODUCTION

Established in 2002, We are professional supplier for Europe and Japan truck spare parts, we have more than 6000 items for the following truck:
 

1. MERCEDES Actros, Axor, Altego, SK, NG, Econic
2. CZPT FM12, FM10, FH16, FH12, FH10, F10, F7
3. SCANIA 4 series, 3 series
4. MAN TGA, TGX, F2000
5. Renault Premium, Maqnum, R. V. I, Midlum, Kerax
6. DAF XF95, XF105, CF75, CF85,
7. CZPT Daily, Stralis, Eurocargo
8. Hino 300, 500, 700 
9. CZPT FUSO, CANTER
10.Nissan UD

There are more than 300 different kind of factories has been coopereated with us for a long time, and all of these factories has been pass ISO 9001, most of them pass TS 16949. for the quality we have real confidence with our suppiler. but of course we are selling with big amount so the price will be quite competitive as well.

Our products range covering engine parts & brake parts,& chassis parts & body parts & transmission parts, make our best to satisfy customer high quality products and good service, all goods we give 1 years warranty.

If you need more information, please feel free to contact us, we’ll supply you quality products, competitive price and multiple payment term.

Types of V-Belt Drives

When evaluating drive technologies, you might want to consider a V-Belt. Not only can it improve the performance of an older drive, but it can save you time and money in the long run. Industry standard V-belts are prone to failing because of excessive wear, heat cracks, and stretching. Inefficient and downtime resulting from frequent retensioning and replacement can cost your company both time and money.
belt

Cross-

A cross-belt for a V-Belt is a belt that is used in a conveyor system. This belt consists of 2 parts: an elastomer core and a fabric cover. The elastomer core is typically made of high-shock-resistant polyurethane. Different manufacturers have different synthetic rubber stocks, which may be used to prevent premature failure and extend the operating temperature range of the belt. Ideally, a well-engineered V-belt is stiff in the width and flexible along the length of the belt. The fabric covers are generally made of 2 different types of rubber, including compression and cushion rubber.
The diameter of the driver and driven pulleys are important considerations for choosing the right cross-belt for a V-belt. This will determine the belt length. The length should be proportional to the diameter of the drive shaft. Smaller diameters are better for smaller belts, which can increase elongation, which decreases the life of the belt. Larger diameters, on the other hand, can increase slippage, fluctuating force, and power loss.
Choosing the right V-belt for your vehicle is important, especially if you’re replacing a worn-out one. In some cases, the old V-belt may become too loose or a loop with a rubber-coated edge. You should measure the length of the belt before you buy it. Using a flexible english measuring tape, you can determine which size is best for your vehicle.
A cross-belt can increase power transmission by minimizing slipping. It also provides shock-absorption and increases the load capacity of the V-belt. It is the best option for heavy-duty machines where torque and power are critical. In some applications, this belt may be more effective than an open belt. If you use it for short distances, a cross-belt can be a better choice.
When choosing a V-belt, make sure to check the power ratio. The power of a belt depends on the initial tension applied to it. Also, the friction between the 2 mating surfaces is a factor. A V-belt with a high power density is not suitable for close-center applications. You can choose a narrow V-belt if you need a narrow belt for your machine.
belt

U-shaped

The V-belt is a versatile belt used in countless industrial applications. Advancements in engineering have led to many different types of V-belts. Whether it’s a U-shaped belt or a double-sided V-belt, proper installation and maintenance are crucial for trouble-free operation. Below are some common V-belt specifications. Read on to learn more! The U-shaped V-belt is 1 of the most common.
A V-belt is a flexible, pliable machine element used to transmit power between 2 or more rotating shafts. Its cross-section is trapezoidal, so that as the tension increases on 1 side, the belt wedges into the groove on the opposite side. The increased friction between the 2 components results in a high torque transmission and minimal power loss from slippage. U-shaped V-belts are ideal for a variety of applications, from lawn mowers to cars.
The U-shaped V-belt is made of 2 parts: an elastomer core and a textile cover. The core is made from a flexible material with high flexural strength and shock resistance. The cover is made of textile material that is treated to create a chemical bond with the belt’s core material. This makes it pliable and strong while preventing the cover from becoming worn out or damaged.
Unlike flat belts, U-shaped V-belts are designed to fit into a U-shaped sheave, which increases their lateral rigidity. They also maintain their stability under shock and vibration loads. Their simplicity makes installation and tensioning much easier. The constructional components of a standard V-belt are illustrated in Figure 9. Each component has a vital role in the belt’s performance. Similarly, different materials can influence the belt’s performance.
As with any belt, proper tension is crucial. Having a loose belt causes slippage and rapid wear, which robs you of energy and productivity. Likewise, too much tension can cause premature belt wear. Proper tension is defined as the lowest level at which the belt does not slip or squeal under peak load. This tension range can still operate a drive, so it’s important to find the correct tension for your particular application.

Cogged

There are many advantages of a Cogged V-Belt. Its extra-thick construction allows for bends around smaller pulleys. It also runs cooler and lasts longer than a traditional V-belt. In addition, it has a higher coefficient of friction than a wrapped V-belt. Cogged V-Belts can also resist heat, making them an excellent choice for high-temperature applications.
A cogged V-Belt is also less likely to suffer from heat buildup, which can shorten the life of a standard belt and increase downtime and replacement costs. A Cogged V-Belt is more expensive than a wrap-molded belt, but it will pay for itself in as little as 1 month. Most synchronous belt conversions pay for themselves in less than 2 years. A longer payback time is typical with a larger system.
Cogged V-Belts are used in many applications, including in-line conveyors, gantry cranes, and wind turbines. The belt itself is composed of various types of rubber and reinforcements. They undergo tensile and compressive stresses as each segment of the belt passes through the pulley. Therefore, a different type of material is needed for the bottom side of the belt. The ideal material for this area should have a high coefficient of friction and increased wear resistance.
The Cogged V-Belt has a trapezium-shaped cross-section. The fabric cover resists heat and abrasion and helps protect the internal components of the v-belt. The different types of materials used in the fabric cover are patented. In some cases, the fabric cover is made of Kevlar or aramid fiber. This allows for smaller pulley diameters and more flexibility.
A Cogged V-Belt is made of 2 pieces of material. One is thick and includes a pitch line while the other has a slack side. The top is thicker and wider, while the bottom side has a lower pitch line. The slack side has a less pitch and more tension. Using a Cogged V-Belt will increase your productivity and help you save money.
belt

Wedge

The Wedge V-Belt is 1 of the most popular types of drive belts available. The patented, narrow-profile design allows for lighter, thinner belts with greater transmission capabilities. The HY-T V-Belt is constructed with Vytacord tension members for strength and dimensional stability, and includes a cushion made of engineered rubber compound. This belt is ideal for high-speed, high-resistance applications, such as compressors, stone mills, and centrifugal pumps.
HY-T CZPT(r) belts have a continuous V-section, and a wide angle of flexibility. They provide torsional rigidity in long-center drives and are resistant to oil. The CZPT(r) belt is available in lengths up to 140 inches. Its free ribs wedge into the sheave groove to reduce belt whipping. This belt is also designed to fit into new designs and applications, so it’s compatible with virtually any type of drive.
The Wedge V-Belt is a popular choice in industrial applications. Its narrow profile reduces drive weight and space, allowing for higher horsepower. In addition, it can carry a higher load than a standard V belt. Its low cost and high efficiency make it a popular choice for many industrial applications. In addition to industrial settings, it is a popular choice in automotive and construction applications. While it may seem like a complicated belt design, the Wedge V-Belt is ideal for industrial use.
Wedge V-Belts have the same contact angle as the traditional v-belt, but have a narrow upper width. Their narrower upper width decreases their weight, which equalizes the tension on the tensile cord. The wedge-shaped design improves grip and increases wedge effect. Its durability is excellent, and it also features a cog shape for greater gripping power.
Wedge V-Belts are an efficient way to transmit power between 2 drives. They can move significant loads and can achieve very high speeds. The wedged shape of the belt allows it to wedge into the groove when the load increases. Moreover, it minimizes power loss due to slippage. If you want to get the most out of a Wedge V-Belt, make sure it is made of a material that resists heat and moisture.

China Best Sales 51958007431 Tensioner Pulley for Man Truck Parts with Hot sellingChina Best Sales 51958007431 Tensioner Pulley for Man Truck Parts with Hot selling

China manufacturer Supplier Auto Parts Manufacturer China Belt Tensioner Pulley OEM 31180-Pna-003 with Hot selling

Product Description

Supplier Auto Parts Manufacturer China Belt Tensioner Pulley OEM 31180-PNA-003 
Product Specification:

Parts OEM No.: 31180-PNA-003 
Apply To:

For CAR
Brand: FENGMING OR OEM
Condition: Brand New
Stock Availability: Yes
Minimum Order QTY 10PCS
OEM Order Acceptability: Yes
Small order Lead Time: 3-7 days
Large Order Lead Time: 15-30 days
Quality Warranty 12 months
PACKAGING As original or as customer’s request, FENG MING PACKING
Payment Methods: Paypal, Western Union, Bank T/T, L/C
Shipment Methods: DHL, UPS, TNT, FedEx, Aramex, EMS, Air Cargo, Sea Cargo


 

How to Tell If Your Timing Belt is Worn Out

The timing belt is a component of your engine that consists of special materials that coordinate the rotational movement of your camshaft and crankshaft. This synchronization is vital for sustainable combustion. In addition to being vital for the proper operation of your engine, the belt is also responsible for setting the pace at which it will turn. Timing belts must be extremely strong and resilient, able to maintain a high degree of synchronicity, and operate effectively even in the most severe conditions.
belt

Problems caused by a worn-out timing belt

A worn-out timing belt can cause misfiring. Because the belt controls the movement of the pistons in the engine, it’s critical that it’s functioning properly. Misfires can cause serious engine damage and should be fixed as soon as possible. But how do you know if your timing belt is worn out? Here are 3 of the most common symptoms of a worn-out belt.
A car engine will misfire if the timing belt is broken, which could lead to severe damage. A broken belt may also cause excessive smoke to be produced by the exhaust system. If these symptoms are present, it’s time to take the car in for a timing belt replacement. A worn-out belt will affect the performance of your car. It will also affect the engine’s starting speed. When it’s time to replace it, you should do it now to avoid future problems.
Misfiring and premature cylinder closing are 2 of the most common symptoms of a worn-out timing belt. A worn-out belt can cause permanent engine damage. Because the timing belt contains teeth that grip the gears, it can slip. If the timing belt slips, the teeth can fall into the gears, causing the engine to misfire. Worn-out timing belts can also cause the engine to stall.
Engine ticking is another common sign of a worn-out timing belt. It can also be caused by low oil pressure. When oil pressure drops, the timing belt will become loose and cause a ticking sound. You should replace the timing belt as soon as it’s damaged. But it’s not enough if you don’t notice any of these signs right away. If the ticking sound continues, you’ll probably have an engine-related problem.

Types of timing belts

Timing belts are made of special materials that help the engine synchronize the crankshaft’s rotation with the camshaft’s. This precision is vital for the combustion process, as it ensures the proper opening and closing of the valves within the combustion chamber. The belts control the engine’s pace, which is why they must be strong enough to maintain synchronicity and operate at high speeds. However, timing belts do not come cheap, so there are several factors that you should be aware of before buying one.
First, timing belts come in different pitch sizes. A typical metric pitch is 5 millimeters, but some manufacturers use a higher or lower pitch. The pitch determines how much tension the belt will be able to carry and whether or not it will wear out prematurely. Other pitch sizes are more common. Timing belts come in 3 different widths, and they all have different tooth profiles. To find the right 1 for your engine, you need to know the pitch.
Modified curvilinear belts are made of 2 different types of materials. They combine the strengths of trapezoidal and curvilinear belts. The outer surface of these belts has a steeper angle than the belt’s teeth, which means that the power transmitted by the motor is much higher. Consequently, they are the primary choice for high-performance industrial applications. A synchronous timing belt is ideal for applications where precise synchronization of the driven and driver shafts is important.
Spliced and welded timing belts are used in many general applications. These belts typically have no joints or weak points and are more durable. These types of timing belts are also made with a smooth back and sealed edges. If you need a custom length or shape, these can also be manufactured. Then, you can order them for your exact measurements. When you need a new timing belt, you can simply ask for a quote and order 1 online.
belt

Common problems

Timing belts are a crucial part of your car’s drive system, and improper installation can cause a whole host of issues. It is also susceptible to crimping and premature wear. In either case, it is vital to take action early to prevent excessive engine wear and extend the life of the timing belt. Here are some common problems with timing belts. You may be surprised to learn that these problems are often caused by common car maintenance practices.
Regardless of the cause of the problem, a worn or faulty timing belt will affect the engine’s timing. This may result in misfires or excessive exhaust release. Engine misfiring is a serious sign that something is amiss. Depending on the extent of the problem, it could even lead to engine damage. If you experience erratic performance or excessive smoke, it’s likely the timing belt is faulty. Here are some common problems with timing belts and their causes.
Engine misfire is a common warning sign that your timing belt is wearing. This occurs when the timing belt slips off the gears or camshaft, causing the cylinder to open too early. If you notice this problem, take immediate action by visiting your mechanic immediately. Moreover, timing belt failures can cause a large amount of damage to your car’s engine, so it is essential to have your timing belt replaced in time.
Improperly adjusting the tension of your timing belt can also lead to serious problems. This can cause excessive wear on your engine’s pistons and valves, and damage the engine. Ultimately, a damaged timing belt may result in an expensive engine rebuild. While this might seem like a good option, it is not always the most practical solution. Ultimately, your car’s timing belt will wear down if you don’t fix these problems immediately.

Symptoms of a worn-out timing belt

If your car’s engine makes a high-pitched squeal when you start or run it, you may be experiencing a worn-out timing belt. You can check the belt by opening the hood and listening closely to the noise. You may also notice uneven RPM counts. The squealing sound can be caused by a number of factors, such as low oil pressure, engine lubrication problems, or even the timing belt.
If your car is exhibiting these symptoms, then it’s time for a replacement. A timing belt breaks down while your engine is running, and this can cause major engine damage. The timing belt is connected to the crankshaft and camshaft by a belt that keeps the 2 parts in sync rotation. When the timing belt wears out, it may cause a jump in the belt’s tooth, causing cylinders to open and close randomly, resulting in blow-by.
A timing belt is crucial to the functioning of your car’s engine. It synchronizes the engine rotation system and opens and closes the valves at the right time. Because it is subject to great forces inside the engine, the belt must be replaced at some point. Every vehicle needs a new timing belt at least once in its lifecycle. But what are the symptoms of a worn-out timing belt?
The timing belt is crucial to your car’s performance, so if you notice any of these signs in your vehicle, you should make an appointment with a qualified mechanic. The best way to tell if your timing belt needs to be replaced is to visually inspect the belt. You can visually inspect the belt while the engine is off, and if you notice it’s sagging, you should replace it.
belt

When to replace a timing belt

A timing belt is an essential part of your vehicle’s engine and is responsible for synchronizing the rotation system, allowing the valves to open and close at the correct time. Due to its constant use and great forces inside the engine, timing belts must be replaced at some point. The recommended interval for timing belt replacement is anywhere from 60,000 to 150,000 miles. In most cases, timing belt replacement is recommended for vehicles between 6 and 10 years old.
Costs for a timing belt replacement can vary widely depending on the make and model of your vehicle. The labour and parts used for timing belt replacement are relatively inexpensive, but you’ll have to remove several parts of your engine to access them. Timing belt replacement also involves replacing the water pump, which is driven by the timing belt. These other parts will be replaced with new ones, but the overall cost of the repair depends on the type of car you drive.
A timing belt is a thin, rubber piece that runs along the front of the engine. It’s responsible for synchronizing the valves and camshafts and is an important component of an engine. The belt’s custom teeth make it easy to see when it’s time to replace your car’s timing belt. Oftentimes, car manufacturers recommend timing belt replacement every 2 to 4 years or 50,000 miles, and they’re not the only ones who recommend it.
A professional mechanic can replace the timing belt and water pump in 1 service, saving you both time and money. Timing belt replacement is an intricate task and can last anywhere between 4 and 8 hours, depending on the make and model of your car. However, it is worth it if you can get your vehicle into a garage or repair shop sooner rather than later. You can save a lot of money on labor costs by replacing your timing belt and water pump yourself.

China manufacturer Supplier Auto Parts Manufacturer China Belt Tensioner Pulley OEM 31180-Pna-003 with Hot sellingChina manufacturer Supplier Auto Parts Manufacturer China Belt Tensioner Pulley OEM 31180-Pna-003 with Hot selling

China Standard Good Quality Auto Engine Parts Belt Tensioner Pulley OE No 46546374 for Alfa Romeo/FIAT/Lancia with high quality

Product Description

 

Detailed Photos

Good Quality Auto Engine Parts Belt Tensioner Pulley OE NO 46546374 For ALFA ROMEO/FIAT/LXIHU (WEST LAKE) DIS.A

Tensioner Pulley, V-ribbed belt VKM 32571
Diameter: 66 mm
Width: 29 mm
Tensioner Pulley Actuation: Automatic
Alternative Repair Kit: VKM 32050-1
Complete pulley unit
 

OEM Number:

46546374
5518.2 VKBA523 482A/472 VKBA 5038 35BWD16 VKM14103

 

Company Profile

ZheJiang Mighty Machinery Co. Ltd is a professional manufacturer of auto bearings for more than 20 years. We provide a one-stop service for our customers. Our main products include wheel bearings & hub assembly, belt tensioners, clutch release bearings, and other parts.

Relying on the professional and rich manufacturing experience and many substantial factories which stable cooperated for many years, Mighty suppliers customers high-quality products at very competitive prices.

 

Customer’s satisfaction is our First Priority, We adhere to the concept of ” Quality First, Customer First”. We will continue to provide high-quality products and the best services to our customers and build up CZPT long-time friendship partners.

 

Our Advantages

More than 20 years of manufacturing and exporting experience
OEM manufacturing available
Full range, large stock
Quickly feedback
One year warranty
One-stop service
On-time delivery

Packaging & Shipping

FAQ

1. What’s the minimum order quantity?

We don’t have the minimum order quantity. We can also provide free samples, but you need to pay the freight.

     
 2. Do you provide ODM&OEM order service?

Yes, we provide ODM&OEM services to customers around the world, and we can customize different brands and different sizes of pacakging boxes according to customers’ requirements.

     
3. After-sales service and warranty time

We guarantee that our products will be free from defects in materials and workmanship within 12 months from the date of delivery. The warranty is void due to improper use, incorrect installation, and physical damage.
 

4. How to place an order?

Send us an email of the models, brand, quantity, consignee information, model of transportation, and payment
Confirm payment and arrange the production.
 

5. What are your packing conditions?

We use standardized export packaging and environmental protection packaging materials. If you have a legally registered patent, we will package the goods in your brand box after receiving your authorization

6. What are your payment terms?

T/T is 30% of the payment in advance and 70% balance before delivery. Before you pay the balance, we will show you photos or videos of the products and packaging.
 

7. How long is your delivery time?

The delivery time of sample order is 3-5 days, and that of a batch order is 5-45 days. The exact delivery time depends on the item and the quantity you ordered.
 

8. Do you test all products before delivery?
Yes, according to ISO standards, we have professional Q/C personnel, precision testing instruments, and an internal inspection system. We control the quality of every process from material receiving to packaging to ensure that you receive high-quality products

 

What Is a V-Belt?

What is a v-belt? It is a rubber belt that is trapezium-shaped and has an elastomer core that holds the parts together. Its elastomer core is generally made of polyurethane and has good shock resistance and flexural strength. V-belts sometimes have 2 sections, 1 of which is a compression rubber and the other cushion rubber. They can be narrow or wide, depending on their use.
belt

Classical V-belts replace leather belts

Classical V-belts are a popular choice among truck drivers because they are more durable. They are typically made of polymer or rubber, with fibers from other materials added for reinforcement. These belts are a good replacement for leather belts and offer many benefits. They are durable, offer excellent temperature and oil resistance, and are easy to use. If you’re considering replacing your current belt, consider buying a replacement belt made of the same material.
Most classical V-belts are used individually and come in A and B sizes. They are rarely used in single-belt drives. Buying several A or B belts instead of 1 C belt can save money. The narrow V-belts also provide higher power ratings. This is due to their narrow profile, which places more of the reinforcing cord under the sheave. Narrow V-belts are ideal for heavy duty applications.
When you’re replacing an existing V-belt, you’ll need to measure its top width and circumference. Once you’ve determined these parameters, you’ll be able to select the right replacement belt. Make sure to take measurements of the belt’s dimensions and top width before ordering. Using these measurements will help you determine the best size for your new belt. You’ll be able to tell whether you need a larger or smaller belt after measuring the top width and circumference.
If you’re looking to replace your leather belt with a belt made of synthetic material, a Classical V-belt may be the right choice. Classical V-belts are available in many materials and are more durable than leather. And because they are so versatile, they are the perfect replacement for your current belts. You’ll be glad you did. So, don’t be afraid to experiment with this type of belt. They’ll work well in any setting, including heavy equipment.
When buying a Classical V-belt, be sure to check the dimensions and type of belt you choose. These are available in notched or cogged designs. Notches are a great way to reduce bending stress. Notches also help dissipate heat from the belt, a major factor in premature belt failure. Notched V-belts are designed to balance a combination of flexibility and tensile cord support. They are spaced properly to minimize cracking and undercord damage.
Unlike leather belts, Classical V-belts are made of synthetic materials. They are easy to install, have a wide range of sizes, and come in light to heavy-duty varieties. The V-belt’s trapezoidal shape helps it track in the grooves of pulleys and prevents it from slipping while in use. It also helps in reducing power loss, since it’s easier to grip the pulleys than leather.
belt

Narrow v-belts are more efficient

There are 5 basic types of V-belts. Their differences in cross-sectional size and power transmission make them superior to multiple single v-belts. The diagram below shows these types and how each differs from 1 another. The included angle of each belt is 40 degrees. The lower number indicates the more efficient version. Narrow V-belts are generally less expensive. Narrow v-belts are generally more efficient than wider belts.
There are several factors that influence a V-belt’s efficiency. Although the efficiency is high when a new belt is installed, the efficiency can drop to the low nineties. However, these belts are relatively resilient, and even with lower efficiency can function properly. Even if the efficiency of a V-belt is lower than it could be, it will still function. In fact, the higher the efficiency, the more energy it will save.
The first is the type of pulley. A narrow V-belt is more flexible than its wider counterpart. The belt pitch diameter is 32deg or 38deg. In addition, the belt can be cogged for added flexibility. In this way, the belt will not touch the bottom of the groove, but will only contact the inclined flanks. Without this wedge effect, the belt’s total friction force is higher. This means that it can transfer higher forces.
While a V-belt looks like a glorified rubber band, it has undergone tremendous technological development since it was first used in 1917. Synthetic rubber compounds and other cover materials have replaced rubber in the belt. New construction methods, tensile cord improvements, and cross-section profiles have resulted in a confusing variety of V-belts. Their differences, however, are based on the type of application for which they’re used.
Another type of V-belt is the raw edge variety. This type of belt is commonly used in manufacturing facilities. This type of belt requires less energy to operate. The raw edge also resists hardening. This is important since unmatched flexibility results in a smooth belt. Also, notched V-belts reduce vibration by 80%. Further, angular misalignment increases the risk of premature failure of a V-belt.
These belts differ in their overall design. While conventional V-belts are more common, narrow V-belts are more efficient and versatile. They are made of different types of rubber and reinforcements, which combine to create a trapezium-shaped cross-section. They can handle fractional loads and even 500 horsepower. Furthermore, their durability is largely dependent on their ability to withstand poor operating conditions.
Double-sided v-belts have unique features. These belts are used in applications with multiple pulleys. They can be operated clockwise or counter-clockwise. They can also be used to drive around multiple reverse bends. Further, they are more efficient and quieter than their counterparts. Finally, double-sided v-belts have 2 compression cores. The tension cord runs through both sections.
belt

Double cogged v-belts increase lateral rigidity to reduce belt whip

A double cogged v-belt is a hybrid of a traditional double versus a cogged vee-belt. These belts are useful for applications that require a large amount of flexibility without compromising durability. The double cogged design also allows the belt to follow a serpentine path. The varying dimensions of a double cogged v-belt depend on manufacturer standards.
A v-belt is measured by defining the centerline, the inside length of the v-belt, and the pitch line, which is the distance between the top and bottom sides of the trapezium. The width and height of a v-belt are defined by its cross-section. Each cross-section is given a different designation, including the width and height.
A standard V-belt is a v-belt with a fabric cover. It provides firmness in a smaller space and is less prone to belt whip when used in heavy-duty applications. Its slim profile and light gauge tensile cord make it suitable for many industrial applications. The standard length of a double cogged v-belt varies from 530 to 3,000 mm.
Single cogged v-belts are commonly used in manufacturing machines that operate in close proximity to 1 another. Single cogged v-belts increase lateral rigidity and reduce belt whip. They are also ideal for heavy-duty applications, such as in mining or quarrying. Double cogged v-belts also increase lateral rigidity to minimize belt whip.
The elastomer core of a v-belt is surrounded by tension cords. These tension cords are embedded into the rubber compound, creating a composite structure that provides a high degree of shock resistance and flexural strength. The tension cords are often made of steel, polyester, or aramid fibers. This material makes it much stronger and more durable.
A double cogged v-belt is a highly rigid option for applications where lateral rigidity is an important concern. The double cogged design also increases lateral rigidity to reduce belt whip and enhances power transmission efficiency. Double cogged v-belts also offer positive slip-proof engagement. These belts are also easier to maintain, require less maintenance, and require no lubrication.

China Standard Good Quality Auto Engine Parts Belt Tensioner Pulley OE No 46546374 for Alfa Romeo/FIAT/Lancia with high qualityChina Standard Good Quality Auto Engine Parts Belt Tensioner Pulley OE No 46546374 for Alfa Romeo/FIAT/Lancia with high quality

China Hot selling Hot Sale Auto Parts OEM MD327653 Tensioner Pulley for CZPT near me supplier

Product Description

Hot Sale Auto Parts OEM MD327653 Tensioner Pulley for Mitsubishi 

                                                                  PRODUCT SPERCIFICATION

Item Name.:

 Belt Tensioner Pulley

Car Make:

 Scudo Dyna Hiace Hilux
OEM: MD327653

Quality

100% tested
SIZE Standard

OEM Order

Welcomed

MOQ

10PCS

Certification

ISO9001/ TS16949 

Place of Origin

China

Warranty

1 years

Color

 same as picture

Payment

Paypal, T/T, W/U, MoneyGram

Packing

Neutral /fengming/original/Customized

Delivery time

3-10days

If you are interest in our products,please feel free to contact me

What we can promise you?

 1. Manufacturing & Selling Integration
 2. Our companies located in HangZhou China which are in charge of different markets
 3. 1 Year warranty for Fengming brand products under normal use
 4. Unique Fengming brand packing: one Fengming poly bag plus one Fengming red box
 5. Competitive price with high & stable quality products
 6. Total 2,000 square meters warehouse to make sure fast delivery
 7. 10 years’ experience in researching, developing and supplying auto parts for Japanese cars since 2009

Customer Reviews:
95% positive testmonials from customers around the world. Fengming brand products’ quality, packing and Fengming service get excellent approval among customers. Seeing is believing!

Fengming Auto Parts CO., Ltd main products line:
Auto ignition system: Spark Plug, Ignition Coil
Suspension Parts: shock absorber, control arm, ball joint,stabilizer link, tie rod end, steering rack
Brake parts: brake pads, brake disc, brake master cylinder, wheel cylinder
Fuel pump, water pump, radiator, full gasket kit, engine belt

HangZhou Fengming Auto Parts CO., Ltd company profile:
HangZhou Fengming AUTO PARTS CO., LTD specializes in manufacturing and selling engine parts for Japanese cars, established in 2009. Fengming AUTO PARTS has developed more than 4000 different kinds of products for Japanese applications like Toyota, Honda, Nissan, Mitsubishi, Mazda and Subaru including brake pads,ignition coil, oxygen sensor, water pump, power steering rack, timing belt kit etc. We have been committed to providing high efficiency, quality guaranteed, long durability auto parts to our customers. Until now Fengming Auto Parts CO., Ltd has cooperated with many big factories such as Aisin,NGK,DENSO,KYB in order to meet customers’ needs in different countries. Now we have more than 200 workers with the production capacity of 50,000 to 100,000 sets every month. And we have built up warehouses total covering area 2,000 square meters in HangZhou China, thus, we are able to deliver goods to you promptly.

 

Choosing a V-Belt

When choosing a v-belt, you should understand the characteristics of each type and how they affect the performance of your machine. Listed below are the characteristics of Cogged, Narrow profile, and wide v-belts. Learn about the advantages and disadvantages of each. Choose the right v-belt for your machine to maximize its performance. Learn about the different materials used to make v-belts and how they influence the performance of your machine.
belt

Narrow v-belts

While the flat belts are the most common type of v-belt, narrow v-belts are also a common option for industrial applications. These belts are similar to wedge belts in that they transmit heavier loads, but in a smaller form. Narrow v-belts are typically designated as 3V, 5V, and 8V and are denoted by their top width, multiplied by an eighth of an inch. Narrow v-belt sections conform to a wedge belt profile and are usually standardized by manufacturers. For example, section 3V corresponds to a wedge-type profile, while section 5V corresponds to SPB.
Both narrow and conventional v-belts are made of rubber stocks, which are generally composed of polymer or synthetic rubber. Fabric materials may be used to cover the stock material, adding a layer of reinforcement and protection. Narrow v-belts have a higher power rating than traditional V-belts. This is due to their greater depth-to-width ratio, which puts more of the reinforcing cord beneath the sheave.
The Wedge TLP ™ Narrow V-belt from Continental features a homogeneous one-piece design for maximum strength and long-term performance. These belts feature a high-denier cord and can handle significant horsepower increases. These belts are ideal for industrial applications. However, they are not as durable as their wider counterparts. The Wedge TLP is also an excellent choice for heavy-duty industrial applications.

Cogged v-belts

A key benefit of cogged v-belts is their ability to increase power output without sacrificing reliability. These belts are designed with precision-engineered cogs, which allow them to fit into smaller pulleys without reducing power output. Their raw-edge sidewalls and specially formulated EPDM rubber compound also help provide grip power. Cogged v-belts are manufactured by Carlisle(r) and offer several advantages over conventional belts.
The performance benefits of Cogged V-Belts are widely acknowledged. The company uses added-strength EPDM compounds in their belts to help reduce downtime and energy consumption. They are ideal for demanding applications such as power transmission. These belts are available in a variety of sizes and cross-sections. The section number of Cogged v-belts is H3V, H4V, and H5V.
The main difference between cogged v-belts and wedge belts is in the contact angle. While wedge and cogged v-belts have the same contact angle, the design and construction differs. Cogged v-belts typically include top and bottom layers of rubber, dampening rubber, tension cords, and top and bottom metal rings. Polychloroprene and polyester cords are common materials for the top and bottom layers, while aramid fibers are used for punishing applications.
Cogged v-belts are more flexible than traditional v-belts. Because of the slots on the belt surface, they reduce bending resistance. They are compatible with the same pulleys as standard v-belts, and run cooler and longer. They are also more efficient than standard V-belts. If you are considering a cogged V-belt for your application, it may be worth it to investigate the benefits of this belt type.
belt

Wide v-belts

Variable-speed v-belts are wider in cross section than classical v-belts. The design of variable-speed v-belts varies depending on the manufacturer, but generally features a parallel top and bottom surface. This type of v-belt wedges tightly into its pulley’s grooves, reducing power loss and slippage. This type of v-belt is best suited to applications where speed changes frequently.
High-performance Wide V-belts feature a fibre-reinforced EPDM rubber base. The resulting supercharged EPDM mix is better suited for applications where the belts are subject to higher temperatures. This type of drive belt can also replace existing drives with ease and efficiency. CZPT offers a wide range of drive belts for all applications. For applications where slack is an issue, wrapped V-belts are a smart choice.
Narrow-V-belts, on the other hand, have a more favorable height-to-width ratio. This means that a narrow-V belt can be smaller while still providing the same power transmission. These belts also have a lower mass, which reduces centrifugal forces and enables higher speeds. However, narrow-V-belts are prone to wear, but are still a popular choice in many applications.
In addition to being more durable, wrapped-V-belts have fabric-coated edges for better heat resistance. The material covering wrapped-V-belts also protects them from damage from friction and external contaminants. Unlike their rigid counterparts, these wide-V-belts have an improved lifespan and require less maintenance and downtime. These are excellent alternatives to conventional v-belts. So, what are the benefits of Wide-V-belts?

Narrow profile v-belts

When it comes to choosing the best V-belt for your needs, it is important to understand the differences between narrow profile and classical. Narrow profile V-belts are generally narrower in cross-section than classical v-belts. This makes them ideal for high-speed compact drives and light-duty applications. The following section details the differences between narrow and classical v-belts.
The tensile cords, or “cords,” are embedded into the rubber compound. These cords are the main power-transmitting component of a narrow profile v-belt. The tension cords are located at the pitch diameter of the belt cross-section and increase the tensile strength. They are typically made of steel, aramid fibers, or polyester. The core is usually made of polyurethane, but other materials can be used.
When measuring the v-belt’s width, it is important to understand the various sign-codes. Some v-belts have the wrong sign-coding schema. For example, a classical profile belt should be read as Lw = 3522 mm, while a narrow profile belt should be read as La=3553mm. A narrow profile v-belt has a steeper side-wall, which increases the wedging action. Moreover, the narrow profile v-belt has higher load capacity.
Despite their name, narrow profile v-belts are the most widely used and versatile type of v-belts. They are also the easiest to install. Their general size is similar to that of a wedge, and their number is derived from their numerical prefix. A narrow profile v-belt with a 3L300 part number is 3/8″ wide and 300.0 inches long.

Wide profile v-belts

Wide profile v-belts are designed for heavy-duty applications where extreme performance is required. They are ideal for such applications due to their high-flexural strength and shock-resistance. They also come with many benefits, including good noise-reduction, increased sturdiness, and easy maintenance. This article explores the features of wide profile v-belts and how they can benefit your business.
Classical v-belts have an internal dimensional metric marking called the “CZPT.” This identifies each specific belt. Generally, this number is a combination of the normal profile size designation letter and the internal length in inches. The inside length of the v-belt is indicated on the index of the v-belt. To begin installing the v-belt, mark the floor where it will be hung. Tape the end stop marker to the first stick.
Narrow v-belts are narrower than standard wide v-belts. They are also available in raw-edge cogged profiles and are intended for light-duty applications. Narrow V-belts are also available in 4 sizes. Compared to standard wide profile v-belts, narrow v-belts are most appropriate for high-speed, compact drives. However, wide profile v-belts are generally longer than narrow V-belts.
A v-belt is composed of different types of rubber and reinforcements. It undergoes tensile and compressive stresses on both sides. The top side of a v-belt experiences longitudinal tensile force, while the bottom side is subjected to compression against a pulley. Moreover, the included angle of a v-belt section is 40 deg. Various types of v-belts are available according to their cross-sections and performance specifications.
belt

Standard v-belts

If you are installing v-belts, you must know the right way to measure them. Many v-belts are mislabelled as classic or SPA. If you are unsure of which 1 to choose, you can refer to the standard v-belts index. The basic way to measure v-belts is by using a measuring tape or a cable tie. Using the right technique will ensure you get the right length.
A well-engineered V-belt is made from an elastomer core, which is a material that is resistant to abrasion. The elastomer core is usually composed of polyurethane, which has excellent flexural strength and shock resistance. In addition to the elastomer core, a fabric cover protects the core from wear and environmental forces. Its fabric cover is treated to form a chemical bond with the belt core, which increases the fabric’s resistance to constant bending.
The cross-section of a standard V-belt is commonly described as a trapezium, with its top and bottom sides parallel. Knowing the cross-section of a standard V-belt is essential in matching it with a pulley. It is also important to know how the v-belt is positioned on a pulley and how to select the right belt for the job.

China Hot selling Hot Sale Auto Parts OEM MD327653 Tensioner Pulley for CZPT near me supplier China Hot selling Hot Sale Auto Parts OEM MD327653 Tensioner Pulley for CZPT near me supplier