Belt tensioners are extremely important in the proper operation of the accessory belt drive system. A tensioner maintains the correct amount of tension on the belt at all times throughout its duty cycle. It also helps protect other components such as the alternator and water pump from undue stress and premature failure. In addition, a tensioner is a relatively inexpensive part to replace. So, every time you replace a multi-ribbed belt, be sure to replace the tensioner at the same time.
Furthermore, when a tensioner has reached the end of its service life CZPT recommends that all wear parts are replaced at the same time to ensure the best long-term solution.
THE IMPORTANCE OF CORRECT BELT TENSION
If the belt tension is too low, the belt will slip causing noise, extremely high temperatures and premature belt wear, all of which can lead to the poor functioning of the belt-driven accessories. If the tension is too high, this will cause excessive wear to the belt-driven accessories.
Product Parameters
Item
1345A
Alfa Romeo
5997325
VKM12101
CR1646
F-225717
Alfa Romeo
5972277
VKM122
Audi / VW
68,109,243
VKM11571
CR1682
F-9
Audi / VW
51,109,243
VKM11571
CR1863
F-22
Audi / VW
074109243R
VKM11072
CR1889
F-234389
Audi / VW
57119243C
VKM11105
CR1805
F-234396
Audi / VW
57119243K
VKM11106
CR1892
F-232489
Audi / VW
06A109479C
VKM11113
CR3140
F-123814
Audi / VW
06B109243D
VKM11116
CR3139
Audi / VW
036109243R
VKM11120
CR3146
F-231221.1
Audi / VW
038109243H
VKM11130
CR3176
Audi / VW
078109243C
VKM112
Audi / VW
078109243K
VKM11201
CR1642
Audi / VW
B
VKM21031
CR1681
F-853
Audi / VW
074109243A
VKM21041
CR3123
F-210963.1
Audi / VW
57109243D
VKM21045
CR3142
F-225766.1
Audi / VW
078109244F
VKM21052
CR3129
Audi / VW
036109244D
VKM21120
CR3145
F-231219
Audi / VW
036109181A
VKM21121
CR3148
F-231220
Audi / VW
038109244H
VKM21130
CR3
Audi / VW
038109244J
VKM21147
CR3495
F-239652
Audi / VW
078109244G
VKM21201
CR1643
F-123658
Audi / VW
38,145,276
VKM31
Audi / VW
57145276A
VKM31
Audi / VW
078903341J
VKM31571
CR3124
F-225712
Audi / VW
11281738605
VKM38.1
BMW
11281748131
VKM38.2
BMW
11311721263
VKM18
BMW
11311727611
VKM18
BMW
24410-235
Hyundai
9571176
VKM7
Opel / GM
9158
Opel / GM
94149432
VKM15210
CR1883
F-123645
Opel / GM
97571530
VKM15213
CR1811
F-123806
Opel / GM
9128656
VKM15216
CR1810
F-232481
Opel / GM
14510-PM7-
HONDA
13404-PT0-
HONDA
14510-PR3-
HONDA
MD192731
VKM75
Mitsubishi
MD315265
VKM75
Mitsubishi
MD128765
VKM75
Mitsubishi
Y701-12-730
VKM25210
CR1683
F-123806
Mazda
KLY2-12-SJ0
VKM74
Mazda
R201-12-7
Mazda
RFC6-12-7
Mazda
A wide range of applications:
• agriculture and forestry equipment • automotive and industrial gearboxes • automotive and truck electric components, such as alternators • electric motors • fluid machinery • material handling • power tools and household appliances • textile machinery • two Wheeler
Company Profile
Our Advantages
1.ISO Standard
2.Bearing Small order accepted
3.In Stock bearing
4.OEM bearing service
5.Professional Technical Support
6.Timely pre-sale service 7.Competitive price 8.Full range of products on auto bearings 9.Punctual Delivery 11.Excellent after-sale service
Packaging & Shipping
Packaging Details
1 piece in a single box 50 boxes in a carton 20 cartons in a pallet
Nearest Port
ZheJiang or HangZhou
Lead Time
For stock parts: 1-5 days. If no stock parts: <200 pcs: 15-30 days ≥200 pcs: to be negotiated.
FAQ
If you have any other questions, please feel free to contact us as follows:
Q: Why did you choose us?
1. We provide the best quality bearings with reasonable prices, low friction, low noise, and long service life.
2. With sufficient stock and fast delivery, you can choose our freight forwarder or your freight forwarder.
Q: Do you accept small orders?
100% quality check, once your bearings are standard size bearings, even one, we also accept.
Q: How long is your delivery time?
Generally speaking, if the goods are in stock, it is 1-3 days. If the goods are out of stock, it will take 6-10 days, depending on the quantity of the order.
Q: Do you provide samples? Is it free or extra?
Yes, we can provide a small number of free samples.
Q: What should I do if I don’t see the type of bearings I need?
We have too many bearing series numbers. Just send us the inquiry and we will be very happy to send you the bearing details.
Q: Could you accept OEM and customize? A: Yes, we can customize for you according to sample or drawing, but, pls provide us technical data, such as dimension and mark.
Contact Us
Tips For Replacing a Belt Tensioner
When replacing a serpentine belt or automatic tensioner, you will need a special tool. This tool has a long, flat extension handle that allows you to place a socket onto the bolt and flats on the tensioner arm. The following are some tips to follow when replacing the belt or tensioner on your vehicle. To replace your belt or tensioner, you should start by checking the tensioner’s lubrication.
Serpentine belt
If you notice that the power steering or air conditioning are not working, you should check the serpentine belt tensioner. A malfunctioning serpentine belt tensioner can lead to a host of other issues. The belt may stretch, which can be caused by several factors. Over time, serpentine belt tensioners can also get worn down. Additionally, they can have a variety of other problems, including rust or dirt in the housing. You can replace your serpentine belt by following the instructions found on your vehicle’s manual. Some tensioners attach to the engine via a single bolt. To remove and replace the belt, remove the old unit and the retaining bolt. Locate the locking pin in the engine and place the new tensioner over it. Use a torque wrench or hand tool to tighten the bolts. When installing the new tensioner, be sure to line up the mounting bolt holes with the mounting bolts. Once the tensioner is installed, test the tension by ensuring that the gauge is above the ribs. If it slides down, it is time to replace the tensioner. Before you begin the process of replacing your serpentine belt, be sure to park your vehicle in a level area. Turn off the engine and chock both rear wheels before starting the process. Using a diagram from your vehicle’s repair manual can make the process easier, especially if you are a beginner. You can draw it in your hand, or refer to a repair manual to find out the exact location of the tensioner pulley. If you notice that the belt is slipping or squealing while driving, it may be time to replace the serpentine belt tensioner. A worn-out belt can cause the belt to slip and can cause power steering, air conditioning, and alternator malfunctions. You should also check the belt tensioner regularly. The motor may stall or make a loud noise. These are all signs of worn-out serpentine belt. A serpentine belt uses less space in the engine than a V-belt. It also provides more tension for the serpentine belt, which prevents it from running hot and squealing. Serpentine belts are manufactured to last for several hundred thousand miles. They are a must-have item for your car! So be sure to keep it maintained and properly adjusted! Then, you can be sure to have your car running smoothly and safely. If you notice any of these symptoms, you should replace your serpentine belt tensioner. A serpentine belt tensioner is a simple self-10sioning device that is mounted on the front of the engine. These devices are usually easy to replace and are not complicated to install. You can find 1 at any parts store or online. When the time comes to replace your serpentine belt, don’t hesitate to get the parts you need from a local auto part store.
Idler pulley
The idler pulley and the belt tensioner are essential components of your car’s drivetrain. If any 1 of them fails, all of them must be replaced. This is because they were manufactured at the same time and most likely have the same number of miles on them. As a result, they can all fail within a few thousand miles of each other. Here are some of the symptoms that you should look for when inspecting your idler pulley or belt tensioner. Idler pulleys are a common part of most cars. They play a vital role in the operation of the belt system by directing the belt’s path and providing additional contact with the pulley. The idler pulley is also responsible for turning the cooling fan in an air-cooled Corvair engine. Because of these functions, idler pulleys are often replaced with idlers that differ in size. Idler pulleys are small, 2 to 4 inches in diameter and mounted on the front of the engine block. Their purpose is to create a constant amount of tension on the drive belt. When the idler pulley is worn out, the accessory drive belt may experience excessive vibration and squealing noises. You may wish to replace it as soon as possible. You can do so at AutoZone. A worn or damaged idler pulley will require a replacement. The belt itself will not fall off the car unless the idler pulley is damaged. A squealing sound can be a sign of a broken spring. Alternatively, a mechanic can recommend a replacement based on the condition of the idler pulley. In most cases, idler pulleys are more durable than the belts and are therefore recommended for replacement. You can also notice that the idler pulley is slipping or causing excessive noise. Its constant rotation wears the idler pulley and reduces the tension of the belt. This causes the belt to slip and may even tear off the engine. Ultimately, this could result in stalling. And if you notice the engine belt squealing or making excessive noises, you should consider replacing it. An idler pulley for a belt tensioner are often confused. Though both of them are used in the same application, they differ in many ways. The tensioner is the 1 that receives pressure from the belts and moves them. The idler pulley is not attached to an adjustable bolt, and it can cause unusual noises. It might even make squealing or odd noises.
Spring tensioner
A spring belt tensioner is a solution to a loose belt. It features a strong torsion spring that reduces slack. These devices are designed to fit up to 6mm wide belts. They are highly reliable and durable. They are also suitable for applications where the engine speed is often fluctuating. Here’s how you can choose the best 1 for your vehicle. The spring in the tensioner should be in the proper position to keep the belt taut and free of slippage. The RunRight tensioner is a durable, high-quality product that uses aluminum alloy. Its elastomeric inserts rely on highly elastic natural rubber for good shape memory and durability. Spring tensioners are easy to install and maintain. They are designed for both axial and helical drives. They feature detailed technical drawings and 3-D models to help you determine the best 1 for your application. To choose a spring tensioner, visit our website. A worn bushing in the tensioner pulley or a loose pivot arm can result in excessive noise, vibration, and premature belt failure. In addition, worn springs cannot maintain proper tension. Over time, they lose tension. The pulley arm itself can also become damaged, preventing it from rotating properly. If these problems occur, you’ll need to replace the spring tensioner. If you don’t see any signs of wear, check your mounting bracket and tensioner. A worn pivot bushing can cause the tensioner arm to misalign, leading to excessive back and forth sway. It may also cause the tensioner to jam, which means the belt is too long or too short. If you notice excessive wobble, you should replace the spring tensioner. A faulty tensioner may also be causing excessive oscillation in the pulley. To determine if the spring tensioner is too weak or jammed, check the belt’s length by using a breaker bar or socket with a long handle ratchet. When it’s time to replace your serpentine belt, don’t forget to replace the belt tensioner. The tensioner protects other components from premature failure. It is a relatively inexpensive repair. It should be replaced as part of a larger multi-ribbed belt. It also provides protection for other components of the drive system. In addition to its protection and performance, the tensioner is inexpensive and relatively easy to replace. It’s vital to check the tensioner and idler pulleys to make sure the system is aligned properly. If they don’t align, the belt will slip and cause premature wear. Alternatively, the tensioner may have too much tension, overloading the shaft bearings and causing premature failure in other parts. You should also check the idler pulleys for noise as well, since these are engine-driven accessories.
The Advantages and Disadvantages of Neoprene Timing Belts
The timing belt is an important component of an automobile engine. Made of special materials, this belt coordinates the rotational motion of the crankshaft with the camshaft. The coordinated precision is essential for sustainable combustion, and ensures that the valves in the combustion chamber open at the right times. Timing belts determine the engine’s pace, so it is essential that they perform at high synchronicity and strong enough to operate in extreme conditions.
Fabric timing belt
A timing belt is made of a yarn that has been crimped and woven into a mating surface, called the engagement surface. This yarn, known as the warp, must be able to stretch from a substantially flat state along irregularities in the mold. It must be flexible enough to stretch by several tens of percent under low load conditions. The warp yarn of a timing belt is made of synthetic fiber and is crimped into the right shape to be stretched easily. This fabric can be used without thickening the base cloth. It can contain a large number of warp threads, and its wear resistance can be enhanced over time. The timing belt of the present invention does not crack or wear out after a long time of use. The base cloth does not wear out, which allows the timing belt to last for a long time. This makes it an extremely durable material. To learn more, read on. The teeth of a timing belt are made of tough rubber and a nylon fabric facing. The fabric is coated with a plastic compound that gives it its shape and covers the cord. The materials used to make these belts vary, but all are strong and durable. They are also suitable for high-load applications. In addition to nylon timing belts, strongbelt premiums are also available. In addition to nylon and neoprene timing belts, they are also compatible with RPP and HTD pulleys. The teeth of timing belts are made of high-strength polychloroprene elastomer. The teeth are made of a special manufacturing process that ensures good adhesion. The facing fabric is made of low-elongation glass cord and is covered by a polyamide fabric that has a low coefficient of friction. If you need an exact fit, you can buy a high-quality belt from TransDev.
Neoprene timing belt
When it comes to dependable drive belts, neoprene is hard to beat. It’s widely used in insulated clothing and weather stripping, and has been a key component in the development of timing belts since the late 1970s. And because it’s so hardy, neoprene timing belts are incredibly reliable. Here are a few reasons why. Neoprene is the most durable synthetic material for timing belts, and these 3 reasons should not discourage you from purchasing a new neoprene timing belt. Neoprene timing belts are made of a high-quality chloroprene compound with a hardness of 74 Shore A. The high-strength glass fiber strands in the belt’s body transmit high power while enhancing its flexural strength. In addition, it’s covered with a high-strength polyamide fabric to reduce friction and protect contact surfaces from wear and tear. Unlike neoprene, polyurethane synchronous belts are resistant to temperature and abrasion. Polyurethane timing belts are resistant to acids and chlorides, and exhibit excellent abrasion resistance. A neoprene belt can be used in high-speed applications, and can withstand extreme temperatures. However, the resistance of polyurethane to abrasion is not as good as that of neoprene. The 2 most common types of timing belts are rubber and urethane. Rubber is the least expensive and quietest, and is the least flexible of the two. Neoprene is also highly elastic and does not retain its shape when it’s stretched, making it a popular choice for applications in manufacturing, agriculture, and robotics. They are also great for applications where precision and motion control are important. These properties make timing belts extremely effective in leading the industry toward its goals.
Chain timing belt
Traditionally, a vehicle’s timing system consists of a timing belt or chain. These components keep the engine’s intake and exhaust valves in the proper order. When these components go bad, it can ruin the engine in seconds. But there are advantages and disadvantages to each of them. Read on to learn about the pros and cons of each type of timing system. Here are some examples. Chain: A timing belt is generally made of reinforced rubber. Chain: A timing chain is generally found in heavy-duty vehicles with higher torque. This type of timing belt is also found on many cars and SUVs with 4 cylinder engines that do not require a lot of torque. Unlike timing belts, timing chains are more durable and will last longer than their rubber counterparts. But there are certain things to keep in mind when replacing a timing belt. Make sure to change the oil regularly to avoid premature wear. Chain: A chain is easier to maintain than a timing belt. It does not change length in response to temperature. And it requires a smaller tensioner. However, this also means that the timing belt is more prone to breaking. It can jump out of place if oil is flowing along it, causing an engine malfunction. If this happens, you’ll have to replace the entire timing belt and the engine will not work correctly. That’s why replacing a chain is so important. A timing belt is a critical part of an engine. A failed timing belt can cause catastrophic engine damage. It can slip and break, colliding with the piston and valves. Fortunately, there are a variety of ways to check your timing belt. But a good rule of thumb is to replace it as soon as possible. You’ll also need to remove the front engine cover and any other components that may be in the way. In some cases, the engine might even have to be moved.
Trapezoid shaped teeth
In terms of tooth profile, there are 2 main types of timing belts: the curvilinear and trapezoidal types. Curvilinear timing belts are more rounded and less likely to result in excessive tension loss. These types of timing belts are also more prone to backlash and reduce accuracy. Here’s how they differ from each other. These 2 types of belts share similarities but differ in important ways. Older timing belts generally have trapezoidal-shaped teeth, but newer types use curved teeth. Curved teeth are less prone to wear out quickly and last longer than straight ones. The trapezoidal teeth also tend to wear out more quickly at higher speeds. As a result, they’re only suitable for cars that get very little use. If you’re planning on using your timing belt frequently, you may want to choose a new 1 with curved teeth. Curvilinear teeth are designed to alleviate the stress concentrations caused by trapezoidal tooth profiles. They also have a greater depth and reduce ratcheting. In addition to their efficiency, curvilinear timing belts are quieter than their trapezoidal counterparts. And they’re a little bit more expensive than their trapezoidal counterparts. So, what’s the difference between these 2 types of teeth? Timing belts have a tendency to favor the tracking of an “S”-shaped twist. As a result, a trapezoid-shaped timing belt is more likely to keep the engine in sync. A good quality timing belt will help you achieve this. If you don’t, consider replacing your timing belt with a metric-styled one. That way, you’ll get the best performance out of your belt.
Other types of timing belts
Timing belts are essential for operating your vehicle’s engine. These belts connect the engine’s crankshaft and camshaft. The belts synchronize the timing of the engine’s valves and pistons to prevent damage. Previously, the belt was referred to as the “gilmer drive belt.” There are 3 basic designs for timing belts. Some are shaped like a trapezoid, while others have a curvy tooth shape. Timing belts with this tooth design are generally more efficient for force transmission, although they suffer from backlash. These teeth also wear quickly at high speeds, which can make them prone to noise. In order to solve these issues, manufacturers now offer belts with curved teeth. Another popular type is polyurethane. These are resistant to oil and high temperatures, and are energy-efficient solutions. Polyurethane timing belts offer increased elasticity and load capacity, which are important for optimal torque production. These belts are favored by a variety of industries because of their ease of cleaning and maintenance. They can be used for power transmission systems, as well as in roller conveyor systems. However, fabric timing belts are best used when acceleration forces are high. Other types of timing belts are not always as durable. V-Belts have teeth-like structures on their surfaces and work under constant speed. They are typically a lighter option, but have similar disadvantages. They are more expensive than chains and lack the flexibility of customizing. Unlike chains, timing belts are sold in predetermined length loops. Their pitch is easily identified. It is a key indicator of whether or not they are suitable for a specific application.
Auto parts Belt Tensioner Pulley 13540-50030 for car
Product Name
Auto parts Belt Tensioner Pulley 13540-50030 for car
Size
OEM standard size
Color
Picture
Quality
High Level
Shipping
SEA, AIR, DHL, EMS
Packing
Neutral Packing, Original Packing, Customer Requirement
Payment
PAYPAL, Western Union, T/T
Delivery Time
Within 3 working days
MOQ
10 Pieces
Warrenty
12 months
What we can promise you?
1. Manufacturing & Selling Integration 2. Our companies located in HangZhou China which are in charge of different markets 3. 1 Year warranty for Fengming brand products under normal use 4. Unique Fengming brand packing: one Fengming poly bag plus one Fengming red box 5. Competitive price with high & stable quality products 6. Total 2,000 square meters warehouse to make sure fast delivery 7. 10 years’ experience in researching, developing and supplying auto parts for Japanese cars since 2009
Customer Reviews: 95% positive testmonials from customers around the world. Fengming brand products’ quality, packing and Fengming service get excellent approval among customers. Seeing is believing!
Fengming Auto Parts CO., Ltd main products line: Auto ignition system: Spark Plug, Ignition Coil Suspension Parts: shock absorber, control arm, ball joint,stabilizer link, tie rod end, steering rack Brake parts: brake pads, brake disc, brake master cylinder, wheel cylinder Fuel pump, water pump, radiator, full gasket kit, engine belt
HangZhou Fengming Auto Parts CO., Ltd company profile: HangZhou Fengming AUTO PARTS CO., LTD specializes in manufacturing and selling engine parts for Japanese cars, established in 2009. Fengming AUTO PARTS has developed more than 4000 different kinds of products for Japanese applications like Toyota, Honda, Nissan, Mitsubishi, Mazda and Subaru including brake pads,ignition coil, oxygen sensor, water pump, power steering rack, timing belt kit etc. We have been committed to providing high efficiency, quality guaranteed, long durability auto parts to our customers. Until now Fengming Auto Parts CO., Ltd has cooperated with many big factories such as Aisin,NGK,DENSO,KYB in order to meet customers’ needs in different countries. Now we have more than 200 workers with the production capacity of 50,000 to 100,000 sets every month. And we have built up warehouses total covering area 2,000 square meters in HangZhou China, thus, we are able to deliver goods to you promptly.
Choosing a V-Belt
When choosing a v-belt, you should understand the characteristics of each type and how they affect the performance of your machine. Listed below are the characteristics of Cogged, Narrow profile, and wide v-belts. Learn about the advantages and disadvantages of each. Choose the right v-belt for your machine to maximize its performance. Learn about the different materials used to make v-belts and how they influence the performance of your machine.
Narrow v-belts
While the flat belts are the most common type of v-belt, narrow v-belts are also a common option for industrial applications. These belts are similar to wedge belts in that they transmit heavier loads, but in a smaller form. Narrow v-belts are typically designated as 3V, 5V, and 8V and are denoted by their top width, multiplied by an eighth of an inch. Narrow v-belt sections conform to a wedge belt profile and are usually standardized by manufacturers. For example, section 3V corresponds to a wedge-type profile, while section 5V corresponds to SPB. Both narrow and conventional v-belts are made of rubber stocks, which are generally composed of polymer or synthetic rubber. Fabric materials may be used to cover the stock material, adding a layer of reinforcement and protection. Narrow v-belts have a higher power rating than traditional V-belts. This is due to their greater depth-to-width ratio, which puts more of the reinforcing cord beneath the sheave. The Wedge TLP ™ Narrow V-belt from Continental features a homogeneous one-piece design for maximum strength and long-term performance. These belts feature a high-denier cord and can handle significant horsepower increases. These belts are ideal for industrial applications. However, they are not as durable as their wider counterparts. The Wedge TLP is also an excellent choice for heavy-duty industrial applications.
Cogged v-belts
A key benefit of cogged v-belts is their ability to increase power output without sacrificing reliability. These belts are designed with precision-engineered cogs, which allow them to fit into smaller pulleys without reducing power output. Their raw-edge sidewalls and specially formulated EPDM rubber compound also help provide grip power. Cogged v-belts are manufactured by Carlisle(r) and offer several advantages over conventional belts. The performance benefits of Cogged V-Belts are widely acknowledged. The company uses added-strength EPDM compounds in their belts to help reduce downtime and energy consumption. They are ideal for demanding applications such as power transmission. These belts are available in a variety of sizes and cross-sections. The section number of Cogged v-belts is H3V, H4V, and H5V. The main difference between cogged v-belts and wedge belts is in the contact angle. While wedge and cogged v-belts have the same contact angle, the design and construction differs. Cogged v-belts typically include top and bottom layers of rubber, dampening rubber, tension cords, and top and bottom metal rings. Polychloroprene and polyester cords are common materials for the top and bottom layers, while aramid fibers are used for punishing applications. Cogged v-belts are more flexible than traditional v-belts. Because of the slots on the belt surface, they reduce bending resistance. They are compatible with the same pulleys as standard v-belts, and run cooler and longer. They are also more efficient than standard V-belts. If you are considering a cogged V-belt for your application, it may be worth it to investigate the benefits of this belt type.
Wide v-belts
Variable-speed v-belts are wider in cross section than classical v-belts. The design of variable-speed v-belts varies depending on the manufacturer, but generally features a parallel top and bottom surface. This type of v-belt wedges tightly into its pulley’s grooves, reducing power loss and slippage. This type of v-belt is best suited to applications where speed changes frequently. High-performance Wide V-belts feature a fibre-reinforced EPDM rubber base. The resulting supercharged EPDM mix is better suited for applications where the belts are subject to higher temperatures. This type of drive belt can also replace existing drives with ease and efficiency. CZPT offers a wide range of drive belts for all applications. For applications where slack is an issue, wrapped V-belts are a smart choice. Narrow-V-belts, on the other hand, have a more favorable height-to-width ratio. This means that a narrow-V belt can be smaller while still providing the same power transmission. These belts also have a lower mass, which reduces centrifugal forces and enables higher speeds. However, narrow-V-belts are prone to wear, but are still a popular choice in many applications. In addition to being more durable, wrapped-V-belts have fabric-coated edges for better heat resistance. The material covering wrapped-V-belts also protects them from damage from friction and external contaminants. Unlike their rigid counterparts, these wide-V-belts have an improved lifespan and require less maintenance and downtime. These are excellent alternatives to conventional v-belts. So, what are the benefits of Wide-V-belts?
Narrow profile v-belts
When it comes to choosing the best V-belt for your needs, it is important to understand the differences between narrow profile and classical. Narrow profile V-belts are generally narrower in cross-section than classical v-belts. This makes them ideal for high-speed compact drives and light-duty applications. The following section details the differences between narrow and classical v-belts. The tensile cords, or “cords,” are embedded into the rubber compound. These cords are the main power-transmitting component of a narrow profile v-belt. The tension cords are located at the pitch diameter of the belt cross-section and increase the tensile strength. They are typically made of steel, aramid fibers, or polyester. The core is usually made of polyurethane, but other materials can be used. When measuring the v-belt’s width, it is important to understand the various sign-codes. Some v-belts have the wrong sign-coding schema. For example, a classical profile belt should be read as Lw = 3522 mm, while a narrow profile belt should be read as La=3553mm. A narrow profile v-belt has a steeper side-wall, which increases the wedging action. Moreover, the narrow profile v-belt has higher load capacity. Despite their name, narrow profile v-belts are the most widely used and versatile type of v-belts. They are also the easiest to install. Their general size is similar to that of a wedge, and their number is derived from their numerical prefix. A narrow profile v-belt with a 3L300 part number is 3/8″ wide and 300.0 inches long.
Wide profile v-belts
Wide profile v-belts are designed for heavy-duty applications where extreme performance is required. They are ideal for such applications due to their high-flexural strength and shock-resistance. They also come with many benefits, including good noise-reduction, increased sturdiness, and easy maintenance. This article explores the features of wide profile v-belts and how they can benefit your business. Classical v-belts have an internal dimensional metric marking called the “CZPT.” This identifies each specific belt. Generally, this number is a combination of the normal profile size designation letter and the internal length in inches. The inside length of the v-belt is indicated on the index of the v-belt. To begin installing the v-belt, mark the floor where it will be hung. Tape the end stop marker to the first stick. Narrow v-belts are narrower than standard wide v-belts. They are also available in raw-edge cogged profiles and are intended for light-duty applications. Narrow V-belts are also available in 4 sizes. Compared to standard wide profile v-belts, narrow v-belts are most appropriate for high-speed, compact drives. However, wide profile v-belts are generally longer than narrow V-belts. A v-belt is composed of different types of rubber and reinforcements. It undergoes tensile and compressive stresses on both sides. The top side of a v-belt experiences longitudinal tensile force, while the bottom side is subjected to compression against a pulley. Moreover, the included angle of a v-belt section is 40 deg. Various types of v-belts are available according to their cross-sections and performance specifications.
Standard v-belts
If you are installing v-belts, you must know the right way to measure them. Many v-belts are mislabelled as classic or SPA. If you are unsure of which 1 to choose, you can refer to the standard v-belts index. The basic way to measure v-belts is by using a measuring tape or a cable tie. Using the right technique will ensure you get the right length. A well-engineered V-belt is made from an elastomer core, which is a material that is resistant to abrasion. The elastomer core is usually composed of polyurethane, which has excellent flexural strength and shock resistance. In addition to the elastomer core, a fabric cover protects the core from wear and environmental forces. Its fabric cover is treated to form a chemical bond with the belt core, which increases the fabric’s resistance to constant bending. The cross-section of a standard V-belt is commonly described as a trapezium, with its top and bottom sides parallel. Knowing the cross-section of a standard V-belt is essential in matching it with a pulley. It is also important to know how the v-belt is positioned on a pulley and how to select the right belt for the job.
1761930 Auto Parts Belt Tensioner Pulley CM5Q 6A228 BA For CZPT Focus Fiesta VKM34119
Tensioner Pulley, V-ribbed belt VKM 34119
Diameter: 65 mm Width: 24 mm Tensioner Pulley Actuation: Automatic
Belt Tensioner, belt tensioner pulley, timing belt tensioner, automatic belt tensioner, belt pulley, timing pulley, idler pulley, engine pulley, idler pulley assembly, tensioner & idler pulley, belt idler pulley, drive belt idler, pulley, tensioner.
OEM Number:
FORD 1761930 2431347 CM5Q6A228BA CM5Q-6A228-BB
Reference Number:
654993 03.81828 APV3170 T39295
153988 3146SR 57121 VKM 34119 GA352.87 950652
Application:
FORD B-MAX (JK) 1.0 EcoBoostMPV2016 -140 / 103YYJC FORD B-MAX (JK) 1.0 EcoBoostMPV2012 -1.2
VKBA523
482A/472
VKBA 5038
35BWD16
VKM14103
Company Profile
ZheJiang Mighty Machinery Co. Ltd is a professional manufacturer of auto bearings for more than 20 years. We provide a one-stop service for our customers. Our main products include wheel bearings & hub assembly, belt tensioners, clutch release bearings, and other parts.
Relying on the professional and rich manufacturing experience and many substantial factories which stable cooperated for many years, Mighty suppliers customers high-quality products at very competitive prices.
Customer’s satisfaction is our First Priority, We adhere to the concept of ” Quality First, Customer First”. We will continue to provide high-quality products and the best services to our customers and build up CZPT long-time friendship partners.
Our Advantages
More than 20 years of manufacturing and exporting experience OEM manufacturing available Full range, large stock Quickly feedback One year warranty One-stop service On-time delivery
Packaging & Shipping
FAQ
1. What’s the minimum order quantity?
We don’t have the minimum order quantity. We can also provide free samples, but you need to pay the freight.
2. Do you provide ODM&OEM order service?
Yes, we provide ODM&OEM services to customers around the world, and we can customize different brands and different sizes of packaging boxes according to customers’ requirements.
3. After-sales service and warranty time
We guarantee that our products will be free from defects in materials and workmanship within 12 months from the date of delivery. The warranty is void due to improper use, incorrect installation, and physical damage.
4. How to place an order?
Send us an email of the models, brand, quantity, consignee information, model of transportation, and payment Confirm payment and arrange the production.
5. What are your packing conditions?
We use standardized export packaging and environmental protection packaging materials. If you have a legally registered patent, we will package the goods in your brand box after receiving your authorization
6. What are your payment terms?
T/T is 30% of the payment in advance and 70% balance before delivery. Before you pay the balance, we will show you photos or videos of the products and packaging.
7. How long is your delivery time?
The delivery time of sample order is 3-5 days, and that of a batch order is 5-45 days. The exact delivery time depends on the item and the quantity you ordered.
8. Do you test all products before delivery? Yes, according to ISO standards, we have professional Q/C personnel, precision testing instruments, and an internal inspection system. We control the quality of every process from material receiving to packaging to ensure that you receive high-quality products
How to Repair a Timing Belt Tensioner
Your timing belt tensioner is a critical component of your vehicle’s drivetrain. Too little tension, for example, will cause the belt to slip, and too much tension can overload shaft bearings, leading to premature failure. If you notice that your belt tensioner is not working properly, you should immediately visit a mechanic. Corrosion from road splash, dirt, mud, or other debris can jam the tensioner housing. To avoid this, make sure that you replace your timing belt tensioner as soon as possible.
Symptoms of a bad belt tensioner
If you’ve ever wondered what signs indicate a bad belt tensioner, look no further than your vehicle’s engine. Worn belts or a broken tensioner can cause an irritating squealing noise, as well as the belt to slip. Even worse, a bad tensioner can cause water to enter the belt and pulley, resulting in water damage. A worn tensioner is usually the culprit of the noise, but there are also other warning signs that a belt is in trouble. Your vehicle’s engine may start to run poorly or even squeal when you turn the key. Similarly, your engine may fail to start at all, or the check engine light may illuminate. The belt may also start to wear out in an unusual pattern. These signs indicate that the tensioner is in need of replacement. If you notice 1 or more of these signs, get your car checked right away. To check the condition of the tensioner, remove the drive belt and observe the pulley. You may notice rust dripping or bleeding at the mounting bolts, which are the most common signs of a bad tensioner. If you can’t remove the drive belt, check the pulley by rotating it. If you feel resistance, the pulley is likely worn or slack. Failure of the belt tensioner will also cause other parts of the car to fail. If a bad belt tensioner isn’t fixed quickly, you might not be able to use the vehicle properly. You could end up breaking your car’s engine, losing power steering, and possibly even the water pump. If your car is not running right, you could be stuck in the middle of nowhere. Even if the alternator doesn’t work, you’ll still have a malfunctioning power steering system and a dead AC system. A broken timing belt tensioner can cause strange noises or a no-start condition. These noises and symptoms are signs of a bad belt tensioner, and you’ll have to replace it ASAP. If you don’t know what symptoms mean, don’t hesitate to take your car to a mechanic. You’ll be surprised how easy it is to check this vital component and save yourself a bunch of money.
Components of a belt tensioner
The components of a belt tensioner assembly consist of 4 key components. The clearance between the pulley and the base is critical to the tensioner’s operation. If the tensioner is installed incorrectly, the spring can break and cause severe injury. The spring’s preload and powerful force make it difficult to service the unit safely. These parts are non-serviceable. If you are unsure of how to repair your tensioner, contact an authorized mechanic. The components of a belt tensioner drive are shown in FIG. 2. The rotor shaft is connected to the drive screw, while the second transmission is connected to the gear shaft. The rotor and gear shaft are in parallel with each other. The gear shaft and worm wheel are connected to the belt tensioner drive. In other words, the belt tensioner drive is located in the B-pillar of the motor vehicle. A belt tensioner may be equipped with a drive shaft and electric motor. The drive shaft may also contain a worm gear or worm wheel. The drive shaft also has an intermediate gearbox. Once the tensioner is set, it is ready to move to its safe-position position. It is a relatively simple and inexpensive replacement for your belt. When replacing a multi-ribbed belt, be sure to replace the tensioner along with the belt. Gates recommends replacing all wear parts at once. In the event of a faulty drive belt tensioner, the belt will not stay taut. The pulley can wobble and cause the belt to fray. In addition to this, the bearings can cause a loud squealing noise. In this case, the accessory motors will continue to run, while the belt itself will not. Therefore, replacing the timing belt tensioner is an important part of maintaining the car. In some systems, the belt tensioner uses a worm gear as the first gear. This results in rolling engagement of the screw’s teeth. This reduces noise and vibrations, while maximizing the efficiency of the belt tensioner drive. Additionally, a worm gear can eliminate the need for additional parts in belt tensioners. While this may not be practical in all instances, it is a good choice for space-constrained environments.
Repair options for a timing belt tensioner
A timing belt tensioner is an essential part of an automobile’s timing chain and is responsible for ensuring proper timing. Proper alignment of timing marks is essential to the proper operation of the engine, and improper alignment may lead to damage to the engine. To repair a timing belt tensioner, there are several repair options available. First, you need to remove the engine cover. You can then remove the timing belt tensioner by loosening the pulley using a ratchet or breaker bar. When the timing belt isn’t properly tensioned, the engine will misfire. The engine misfires when the valve opens and the pistons rise at the wrong time. When this happens, the timing belt cannot properly grip the gears and the engine will not function. If this part fails, you’ll have to replace the whole timing chain. However, if you are handy with tools, you can easily replace the entire timing belt tensioner yourself. If your timing belt tensioner is out of alignment, you should replace it. If you’re not sure whether it needs to be replaced, check it with a professional and learn the details of the repair. The timing belt tensioner is the most critical part of the engine, so it’s important to know about it. Otherwise, your car won’t run as well as it could. Repair options for a timing belt tensioner will vary depending on the severity of the problem and how much damage it has done. While there are several repair options for a timing belt tensioner, the average cost of replacement is $364 to $457, and this doesn’t take into account any tax or fee you may be charged. DIY repair methods will usually cost you $50 to $150, and you’ll likely save a lot of money in the process. However, you need to remember that you may be unable to do the job yourself because you don’t know how to use the proper tools and equipment. While it is not difficult to replace a timing belt tensioner on your own, you should know that you’ll need to remove other parts of the engine as well as special tools to make the repair properly. This is an advanced repair job and requires a great deal of skill. If you’re new to home car repair, you may not want to attempt it yourself. There are many other options, such as hiring a mechanic.
Installation instructions
While there are no universal installation instructions for belt tensioners, the manufacturer of your car may provide detailed instructions. Before attempting to replace your tensioner, read the manufacturer’s recommended procedures carefully. To install a new tensioner properly, unload the old 1 and take a picture or sketch of how the belt should be routed. Once the old tensioner is out, follow the manufacturer’s torque specifications. Make sure to unload and remove the belt from the tensioner, and follow the manufacturer’s torque specifications to install the new one. If your car comes with a manual belt tensioner, you can follow the instructions. The manual will have a corresponding guide for installation. When installing a belt tensioner, make sure the manual clearly states the static tension for your particular model. Check that it is in line with the engine relief to ensure proper belt tension. You can then use a 6mm allen key to turn the tensioner clockwise and counterclockwise. Once it is in position, release the tensioner to operate. The belt tensioner should now apply the proper tension to your belt. Before installing a new belt tensioner, make sure you read the manual completely. You should follow these steps carefully to avoid any problems with the tensioner. If the tensioner has failed, you must replace it immediately. A new belt tensioner will help you ensure proper performance of your accessory belt drive system. If you are installing a new multi-ribbed belt, you should replace the tensioner as well. However, it is important to note that replacing the belt tensioner is a complicated process and requires a mechanic to be able to safely remove the belt from the engine. To install a second stage drive belt, walk the belt onto the input drive and generator. Ensure that the belt is seated properly in the grooves of the pulleys. Next, replace the input drive belt and right and left Drive Disk covers. Test the machine to ensure that it is working properly. If it doesn’t, replace the original drive belt. After installing the new belt, you may want to read the manual again to make sure it is in perfect condition.
SSANGYONG ACTYON I SPORTS KYRON REXTON / II RODIUS, GAB_ QJ Closed Off-Road Vehicle MPV Pickup
SSANGYONG
ACTYON I
200 Xdi 4WD
07/2007 –
1998
100
136
MPV
SSANGYONG
ACTYON I
200 Xdi 4WD
10/2006 –
1998
104
141
MPV
SSANGYONG
ACTYON I
2.0 Xdi
07/2007 –
1998
100
136
MPV
SSANGYONG
ACTYON I
2.0 Xdi
11/2005 –
1998
104
141
MPV
SSANGYONG
ACTYON SPORTS I (QJ)
2.0 Xdi
09/2011 –
1998
114
155
Pickup
SSANGYONG
ACTYON SPORTS I (QJ)
2.0 Xdi
04/2007 –
1998
104
141
Pickup
SSANGYONG
ACTYON SPORTS I (QJ)
2.0 Xdi 4WD
09/2011 –
1998
114
155
Pickup
SSANGYONG
ACTYON SPORTS I (QJ)
2.0 Xdi 4WD
04/2007 –
1998
104
141
Pickup
SSANGYONG
KYRON
2.0 Xdi
01/2571 –
1998
100
136
SUV
SSANGYONG
KYRON
2.0 Xdi
05/2005 –
1998
104
141
SUV
SSANGYONG
KYRON
2.0 Xdi 4×4
01/2571 –
1998
100
136
SUV
SSANGYONG
KYRON
2.0 Xdi 4×4
05/2005 –
1998
104
141
SUV
SSANGYONG
KYRON
2.7 Xdi 4×4
05/2005 –
2696
121
165
SUV
SSANGYONG
KYRON
2.7 Xdi 4×4
03/2006 –
2696
120
163
SUV
SSANGYONG
REXTON / REXTON II (GAB_)
2.7 D 4×4
06/2006 –
2696
137
186
SUV
SSANGYONG
REXTON / REXTON II (GAB_)
2.7 Xdi
08/2004 –
2696
120
163
SUV
SSANGYONG
REXTON / REXTON II (GAB_)
2.7 Xdi
03/2005 –
2696
121
165
SUV
08/2006
SSANGYONG
REXTON / REXTON II (GAB_)
2.7 Xdi 4×4
03/2011 –
2696
118
160
SUV
SSANGYONG
REXTON / REXTON II (GAB_)
2.7 Xdi 4×4
05/2004 –
2696
121
165
SUV
05/2012
SSANGYONG
REXTON / REXTON II (GAB_)
2.7 Xdi Turbo 4×4
03/2008 –
2696
132
180
SUV
SSANGYONG
RODIUS
2.7 Xdi
05/2005 –
2696
121
165
MPV
SSANGYONG
RODIUS
2.7 Xdi
05/2005 –
2696
120
163
MPV
SSANGYONG
RODIUS
2.7 Xdi 4WD
05/2005 –
2696
121
165
MPV
SSANGYONG
RODIUS
2.7 Xdi 4WD
05/2005 –
2696
120
163
MPV
Description :
1. The tensioner is a belt tensioner used in the automobile transmission system. The tension pulley is mainly composed of a fixed shell, a tension arm, a wheel body, a torsion spring, a rolling bearing and a spring sleeve. It can automatically adjust the tension force according to the different tightness of the belt to make the transmission system stable, safe and reliable.
2. The main function of the tensioner bearing is to support the mechanical rotating body.
3.Reduce the friction coefficient during its movement and ensure its rotation accuracy.
4.Change sliding friction into rolling friction.
What to Look for in a Belt Tensioner
If you notice the power steering, air conditioning, or power steering stops working, chances are that your belt tensioner has been compromised. A compromised belt tensioner can be completely destroyed overnight, or it can last for a long time before it breaks. Either way, you should never drive with a faulty belt tensioner. It’s far better to have it replaced before the engine shuts down completely. In addition, replacing a belt tensioner will prevent other complications, such as power steering or air conditioning, from occurring.
Misaligned idler pulley
If the tensioner arm is not rotating freely or has an abnormal chirping noise, it could be the result of a misaligned idler pulley. If this is the case, replace the idler. If the idler does not move, you may need to adjust the accessory mount points or use a laser alignment tool. The tensioner arm is only 1 part of the tensioner. A misaligned idler pulley on a belt tensioner is usually the cause of a squeaking noise. If this noise continues even after a replacement of the belt, it’s time to replace the whole belt. A misaligned idler pulley can also be the cause of premature belt wear. If the idler pulley is out of alignment, it could also cause the belt to wear too fast and lead to the premature failure of the timing belt. The tensioner pulley is made of nylon, steel, or plastic. It may be flat or grooved. Before replacing it, check for any cracks, dents, or debris on the pulley’s surface. Plastic pulleys may have broken sidewalls. If the idler pulley is worn out, you might also notice squealing noises when the vehicle is in motion. The misalignment of a belt is most pronounced when the span between the 2 pulleys is short. When the span is long, however, diagnosing the problem becomes more complicated. Small degrees of offset may not be visible to the naked eye, but a laser alignment tool can help identify these subtle variations. In order to identify a misaligned idler pulley on a belt tensioner, you must first determine its cause. When the tensioner’s idler pulleys are out of line, a belt tensioner will not be able to properly adjust the torque that the belt is under. This may result in squealing noises. If this is the case, it is time to call a mechanic. He or she will be able to determine the cause and correct it. If you suspect the problem, your next step is to replace the idler pulley on the belt tensioner. If the ribbed belt is not properly aligned, you may have a misaligned idler pulley. To fix the misalignment, locate the belt adjustment bolt underneath the hood. You should be careful not to damage the alternator or battery terminal while doing this task. If you do accidentally connect the battery positive to the earth, you might be able to damage the ribbed belt and ruin your vehicle’s timing. Besides a misaligned idler pulley on the belt tensioner, another problem may be the alternator’s serpentine belt. If your car’s alternator belt is not aligned properly, you could have misaligned the alternator’s pulley or a worn-out bearing. Regardless of the cause of your problem, you should have the belt inspected.
Bad idler pulley
Having a Bad Idler Pulley on a Belt Tensioner? If this sounds familiar, then it’s probably time to change it. Idler pulleys slowly take hits while the engine is running, causing the belt to wrap and bend. Eventually, the belt will slip, and a new idler pulley should be installed to ensure optimal tension. But before you spend a dime on a new one, let’s talk about what to look for. Symptoms of a Bad Idler Pulley: If the noise persists, there is a problem with the idler pulley or its bearing. These parts wear out over time and may eventually cause a cracked idler pulley or serpentine belt. Not only will the idler pulley create an irritating noise, but it will also damage the belt itself, leading to overheating, stalled engine, and even damage the head gaskets. Thankfully, a Bad Idler Pulley on a Belt Tensioner is easily replaced and will only cost about $40. Although the Idler Pulley is not the most popular component on a car, it’s a critical part that ensures that the engine runs smoothly. It’s easy to overlook this part, but its failure can make it impossible for your vehicle to operate at its optimal level. Moreover, a Bad Idler Pulley on a Belt Tensioner will cause your engine to malfunction, so it’s essential that you check it at regular intervals. If you notice a squealing noise while driving, the Idler Pulley is likely the culprit. Because of friction between the engine belt and idler pulley, the engine belt rubs against the pulley, causing it to squeak and make a clicking noise. This squealing noise will continue until the problem is repaired or replaced. It’s time to start addressing the problem before it becomes too late. If you notice the tensioner pulley moving away from the engine, it’s most likely that the pulley is malfunctioning. A belt that is loose or slack may make it difficult to start the car, or your engine may even overheat. If this occurs, it’s crucial to replace the Idler Pulley as soon as possible, because a Bad Idler Pulley on a Belt Tensioner can seriously damage your vehicle. The Idler Pulley facilitates the motion of the engine belt. It serves as a smooth rotating point that allows the belt to loop without a barrier. Over time, this part of the system will begin to show signs of wear and tear, and replacement is vital to protect your engine, serpentine belt, and other accessories. An early warning sign of a problem is a squealing sound coming from the engine area.
Broken tensioner arm
The belt tensioner is a piece of machinery that is used to keep the belt tight. If this part breaks, you can easily repair it yourself using a long-handled ratchet, serpentine belt tool, or a socket. To repair the tensioner, simply remove the drive belt from the pulley and rotate it to release tension. Check for roughness, resistance, or binding of the drive belt. Noises caused by the tensioner are a sign of a damaged component or excessive oscillation. These noises are usually caused by worn internal components or the tensioner’s pivot bushing. In some cases, the vibration damping system or a worn-out alternator pulley could also be to blame. If this is the case, replace the pulley and tensioner together. To check the condition of your belt tensioner, follow these steps. In addition to worn-out springs, a loose or broken pivot arm could be causing your belt to misalign. A worn-out tensioner pulley bushing will also cause vibrations, noise, and seizing. Lastly, a broken tensioner spring could be preventing the belt from maintaining proper tension. Broken springs are also prone to loss of tension due to heat. Damaged tensioner housing can also affect belt tension. Once the belt is installed, you need to check the condition of the pulley and the tensioner arm. Make sure that the pulley is moving and that the arm is moving smoothly with the cranking and releasing. If the arm is wobbling, the tensioner is failing. If the pulley wobbles or excessive chattering occurs, the tensioner is failing. It can also be seized or jammed. If the tensioner arm has broken, replace it. Replacing the tensioner can be a tedious task. Be sure to use a suitable tool to tighten the pulley and tensioner. If you are not sure of how to replace the pulley, try using a serp belt tool. Another good option is to purchase a 3/8 drive ratchet. If you don’t have this tool, you can use a long 3/8 extension and a deep socket. The belt tensioner assembly can fall off the engine, causing damage to the timing belt. If you are replacing it, you must replace it with a new one, and tighten all of the mounting bolts before reinstalling it. To avoid further damage to the engine, ensure you replace the belt with a new tensioner and a new belt. The tensioner is bolted to the engine’s timing cover, so make sure you carefully tighten the bolts when replacing it.
auto belt drive tensioner pulley for fiat punto 176 46424716 material:plastic outer diameter:80mm inner diameter:20mm height:23mm for fiat punto 176 1993-1999
by air or by sea, you could choose your forwarder or we could send our price for reference
Sample test
available
Warranty
13 months from the day we sending the goods
Cetification
SGS/TUV
OEM service
acceptable
Payment Terms
TT,LC,West Union
Packing Show
Our Service 1.Fast reply in 24 hours 2.Multi-language service 3.Sample test available 4.Trial order is acceptable 5.Urgent order is acceptable if we have products in stock 6.OEM & ODM serive acceptable 7.6-12 months warranty 8. Fast response for after-sales service
About our company 1. 6 years’ global trading experience 2. 6-24 months’ quality warranty 3. 10 professiomal and passionate team members 4. 120 customers from more than 30 countries 5. 2000 products,covering more than 40 brands
We also have many other parts for Fiat. Do not hesistate to contact us!
Types of V-Belts and Their Properties
A v-belt’s inside length and pitch are determined by measuring along the bottom side. The included angle of a v-belt is measured from its flanks when it is extended. Most v-belt sections are 40 degrees. There are different types of v-belts, and the dimensions of each are standardized by different organizations. This article will introduce the different types of v-belts and their properties.
Notched v-belts reduce bending stress
Notched V-belts reduce bending stress by reducing the axial length of the belt by 2 or more notches. These notches are characterized by different profiles, which differ in the pitch angle and the inside length. ISO and DIN standards are followed by the manufacturers of these belts. Notched v-belts are used on industrial machinery in countries other than the US. Compared to the standard V-belts, notched ones are designed to resist bending stress better and offer better heat dissipation. They also last longer and run cooler than standard V-belts. Furthermore, they are about 2 percent more energy efficient than their standard counterparts. Therefore, notched V-belts are a viable replacement for standard V-belts. Notched V-belts are commonly used in industrial applications because of their low price, ease of installation, and availability of many sizes. Another advantage of notched V-belts is that they provide more wedging force and higher load capacity. Notched V-belts have a wider v-groove than flat ones, which makes them more effective for heavy-duty applications. Notched V-belts also provide better traction. They reduce bending stress, which is beneficial for preventing fatigue and tearing of v-belts. Additionally, v-belts can be installed in an existing equipment to add more performance. And with proper maintenance and installation, notched V-belts will provide trouble-free service for many years to come.
Ribbed v-belts reduce heat dissipation
Various kinds of v-belts are available for varying applications. The more popular types are the fractional horsepower and the double-V. Fractional horsepower v-belts are designed for light-duty applications, such as machine shop equipment and household appliances. The common sectional names are 2L, 3L, 4L, and 5L. The L in each of these belts refers to the top width of the belt, multiplied by 1 eighth inch. Unlike conventional belts, ribbed v-belts are flexible, making them ideal for use in vibrating loads. They reduce heat dissipation and can be ordered in single or multiple sets to match your application. However, ribbed v-belts should not be mounted on deep-groove sheaves, as this can cause the belt to turn over. If you use deep-groove sheaves, the risk of rupture is very high. Deep-groove sheaves can also cut banded belts. Extremely worn sheaves can also cause the belt to rip. The 2 types of ribbed v-belts differ in their construction and application. While both types have trapezium cross-sections, they are similar in that they are made of polyurethane or other durable materials. Ribbed v-belts have an additional layer of fabric on the elastomer core for reduced noise and better heat dissipation. Ribbed v-belts are available in a variety of sizes, including trough v-belts. Their cross-sections are categorized by their top and bottom widths and depths. The included angle of most v-belt sections is approximately 40 degrees. Different types of v-belts have different cross-sections, and these cross-sections are standardized by various organizations. As the load increases, a ribbed v-belt will wedge into the groove and decrease the amount of friction needed to maintain the correct torque. Flat belts can track off the pulleys due to friction. However, V-belts are more stable and require less width than flat belts. The main advantage of ribbed v-belts is their increased efficiency. The global-local finite-element model is also used to calculate the maximum and minimum J-integrals during a belt’s running cycle. The data is then used to evaluate the durability of ribbed v-belts in various applications. The numerical models used for the calculations involve a ribbed V-belt with 5 full ribs.
Cogged v-belts increase lateral rigidity to reduce belt whip
Cogged v-belts are designed for maximum performance and durability on even the harshest drive systems. These belts are made from high-modulus polyester cords that resist hardening and stretch and provide superior balance and strength. They also feature raw-edge sidewalls to reduce slip and drive vibration. In addition, they have specially-formulated rubber compounds for oil resistance. CZPT Cog-Belt offers substantial savings in downtime, energy consumption and horsepower. A double cogged v-belt combines the benefits of cogged and double vee-belts. Its bonded reinforced tie band offers enhanced flexibility and reduces belt whipping in multiple-belt drives. Double cogged v-belt dimensions vary depending on the standards of the manufacturer. Regardless of the type, you’ll want to use a belt that is aligned correctly. Standard v-belts are also known as wrapped or raw edge v-belts. Wrapped V-belts feature fabric covers above and beneath the cord to increase lateral rigidity and reduce belt whip. Cogged V-belts also have fabric covers to prevent wear on the core and increase the belt’s operating temperature. They’re ideally suited for applications that require high-temperature operation. Cogged V-belts can significantly decrease energy consumption and improve power transmission capabilities. They also have a bias-cut cover stock that provides axial and lateral stability while preserving the cord integrity. A fiber loaded cogged construction offers optimum flexibility while minimizing heat buildup. It can be installed on any type of drive, including chain conveyors and industrial-grade machines. The two-layer tie-band permanently bonds multiple belts together. This provides maximum cord support, heavy shock absorption, and stability. The belts are also engineered with patented banding processes that eliminate belt turnover and distribute load evenly across the drive. CZPT Cog-Band Belts minimize belt whip and provide stability. They also minimize belt turnover and rollover in heavy-duty industrial applications. A classic v-belt is the most common and economical belt. Its nominal dimensions are 1/2″ to 1-11/2″ wide and 16″ to 400 inches long. The width is usually 40 degrees. Different organizations use different cross-sections to classify v-belts. The following table provides a general comparison of the 2 types. The Cogged V-Belt is designed to reduce belt whip by increasing the lateral rigidity of the belt.
Cogged v-belts provide superior environmental resistance
The patented design of the Dayco V-Belt provides maximum power transmission while combining the benefits of a cogged belt and raw-edge construction. The belt’s top cogged design helps increase air flow around it, preventing deterioration and extending its useful life. The belt’s three-ply design features neoprene impregnated fabric for superior durability and a specially-formulated polyester cord for increased strength and stability. A variety of v-belts are available, with cogged and notched versions presenting unique characteristics. Cogged V-belts are more flexible than uncogged versions and feature ‘X’-shaped grooves for enhanced heat dissipation. Cogged V-belts are interchangeable with conventional v-belts, although their ‘X’ design is most common. Hexagonal v-belts are a popular option for applications where traction is needed. Another type of Cogged V-belt is designed specifically for outdoor power equipment. This v-belt is brown, with smooth clutching covers. Its aramid cord is very strong and provides superior durability in adverse conditions. Cogged V-belts can withstand severe shock loads and are therefore ideal for outdoor power equipment. Furthermore, they offer superior environmental resistance, minimal stretch, and a long service life. A Cogged V-belt is composed of tensile cords that are supported by a rubber stock. Different manufacturers use different synthetic rubber stocks for this purpose. These materials help to extend the belt’s operating temperature range and resist premature failure. In addition to tensile cords, the belt’s body is covered with a fabric cover. The fabric is treated to form a chemical bond with the core materials, which allows it to withstand constant bending.
New Belt Drive Tensioner Pulley OEM 31170-R40-A02 For Honda
Product Specification:
OEM
31170-R40-A02
Car Maker
For CAR
Brand:
FENGMING
Condition:
Brand New
Stock Availability:
Yes
Minimum Order QTY
2PCS
OEM Order Acceptability:
Yes
Small order Lead Time:
3-7 days
Large Order Lead Time:
15-30 days
Quality Warranty
12 months
PACKAGING
As neutral or as customer’s request, FENG MING PACKING
Payment Methods:
Paypal, Western Union, Bank T/T, L/C
Shipment Methods:
DHL, UPS, TNT, FedEx, Aramex, EMS, Air Cargo, Sea Cargo
Types of V-Belts and Their Properties
A v-belt’s inside length and pitch are determined by measuring along the bottom side. The included angle of a v-belt is measured from its flanks when it is extended. Most v-belt sections are 40 degrees. There are different types of v-belts, and the dimensions of each are standardized by different organizations. This article will introduce the different types of v-belts and their properties.
Notched v-belts reduce bending stress
Notched V-belts reduce bending stress by reducing the axial length of the belt by 2 or more notches. These notches are characterized by different profiles, which differ in the pitch angle and the inside length. ISO and DIN standards are followed by the manufacturers of these belts. Notched v-belts are used on industrial machinery in countries other than the US. Compared to the standard V-belts, notched ones are designed to resist bending stress better and offer better heat dissipation. They also last longer and run cooler than standard V-belts. Furthermore, they are about 2 percent more energy efficient than their standard counterparts. Therefore, notched V-belts are a viable replacement for standard V-belts. Notched V-belts are commonly used in industrial applications because of their low price, ease of installation, and availability of many sizes. Another advantage of notched V-belts is that they provide more wedging force and higher load capacity. Notched V-belts have a wider v-groove than flat ones, which makes them more effective for heavy-duty applications. Notched V-belts also provide better traction. They reduce bending stress, which is beneficial for preventing fatigue and tearing of v-belts. Additionally, v-belts can be installed in an existing equipment to add more performance. And with proper maintenance and installation, notched V-belts will provide trouble-free service for many years to come.
Ribbed v-belts reduce heat dissipation
Various kinds of v-belts are available for varying applications. The more popular types are the fractional horsepower and the double-V. Fractional horsepower v-belts are designed for light-duty applications, such as machine shop equipment and household appliances. The common sectional names are 2L, 3L, 4L, and 5L. The L in each of these belts refers to the top width of the belt, multiplied by 1 eighth inch. Unlike conventional belts, ribbed v-belts are flexible, making them ideal for use in vibrating loads. They reduce heat dissipation and can be ordered in single or multiple sets to match your application. However, ribbed v-belts should not be mounted on deep-groove sheaves, as this can cause the belt to turn over. If you use deep-groove sheaves, the risk of rupture is very high. Deep-groove sheaves can also cut banded belts. Extremely worn sheaves can also cause the belt to rip. The 2 types of ribbed v-belts differ in their construction and application. While both types have trapezium cross-sections, they are similar in that they are made of polyurethane or other durable materials. Ribbed v-belts have an additional layer of fabric on the elastomer core for reduced noise and better heat dissipation. Ribbed v-belts are available in a variety of sizes, including trough v-belts. Their cross-sections are categorized by their top and bottom widths and depths. The included angle of most v-belt sections is approximately 40 degrees. Different types of v-belts have different cross-sections, and these cross-sections are standardized by various organizations. As the load increases, a ribbed v-belt will wedge into the groove and decrease the amount of friction needed to maintain the correct torque. Flat belts can track off the pulleys due to friction. However, V-belts are more stable and require less width than flat belts. The main advantage of ribbed v-belts is their increased efficiency. The global-local finite-element model is also used to calculate the maximum and minimum J-integrals during a belt’s running cycle. The data is then used to evaluate the durability of ribbed v-belts in various applications. The numerical models used for the calculations involve a ribbed V-belt with 5 full ribs.
Cogged v-belts increase lateral rigidity to reduce belt whip
Cogged v-belts are designed for maximum performance and durability on even the harshest drive systems. These belts are made from high-modulus polyester cords that resist hardening and stretch and provide superior balance and strength. They also feature raw-edge sidewalls to reduce slip and drive vibration. In addition, they have specially-formulated rubber compounds for oil resistance. CZPT Cog-Belt offers substantial savings in downtime, energy consumption and horsepower. A double cogged v-belt combines the benefits of cogged and double vee-belts. Its bonded reinforced tie band offers enhanced flexibility and reduces belt whipping in multiple-belt drives. Double cogged v-belt dimensions vary depending on the standards of the manufacturer. Regardless of the type, you’ll want to use a belt that is aligned correctly. Standard v-belts are also known as wrapped or raw edge v-belts. Wrapped V-belts feature fabric covers above and beneath the cord to increase lateral rigidity and reduce belt whip. Cogged V-belts also have fabric covers to prevent wear on the core and increase the belt’s operating temperature. They’re ideally suited for applications that require high-temperature operation. Cogged V-belts can significantly decrease energy consumption and improve power transmission capabilities. They also have a bias-cut cover stock that provides axial and lateral stability while preserving the cord integrity. A fiber loaded cogged construction offers optimum flexibility while minimizing heat buildup. It can be installed on any type of drive, including chain conveyors and industrial-grade machines. The two-layer tie-band permanently bonds multiple belts together. This provides maximum cord support, heavy shock absorption, and stability. The belts are also engineered with patented banding processes that eliminate belt turnover and distribute load evenly across the drive. CZPT Cog-Band Belts minimize belt whip and provide stability. They also minimize belt turnover and rollover in heavy-duty industrial applications. A classic v-belt is the most common and economical belt. Its nominal dimensions are 1/2″ to 1-11/2″ wide and 16″ to 400 inches long. The width is usually 40 degrees. Different organizations use different cross-sections to classify v-belts. The following table provides a general comparison of the 2 types. The Cogged V-Belt is designed to reduce belt whip by increasing the lateral rigidity of the belt.
Cogged v-belts provide superior environmental resistance
The patented design of the Dayco V-Belt provides maximum power transmission while combining the benefits of a cogged belt and raw-edge construction. The belt’s top cogged design helps increase air flow around it, preventing deterioration and extending its useful life. The belt’s three-ply design features neoprene impregnated fabric for superior durability and a specially-formulated polyester cord for increased strength and stability. A variety of v-belts are available, with cogged and notched versions presenting unique characteristics. Cogged V-belts are more flexible than uncogged versions and feature ‘X’-shaped grooves for enhanced heat dissipation. Cogged V-belts are interchangeable with conventional v-belts, although their ‘X’ design is most common. Hexagonal v-belts are a popular option for applications where traction is needed. Another type of Cogged V-belt is designed specifically for outdoor power equipment. This v-belt is brown, with smooth clutching covers. Its aramid cord is very strong and provides superior durability in adverse conditions. Cogged V-belts can withstand severe shock loads and are therefore ideal for outdoor power equipment. Furthermore, they offer superior environmental resistance, minimal stretch, and a long service life. A Cogged V-belt is composed of tensile cords that are supported by a rubber stock. Different manufacturers use different synthetic rubber stocks for this purpose. These materials help to extend the belt’s operating temperature range and resist premature failure. In addition to tensile cords, the belt’s body is covered with a fabric cover. The fabric is treated to form a chemical bond with the core materials, which allows it to withstand constant bending.
Belt Tensioner Pulley Assembly for CZPT (16620-0D571)
Part No.:
16620-0D571
Material:
Iron
Fit to:
toyota corolla
Packing:
1.Neutral Plastic Bag and Neutral Outer Carton, Pallet. 2.Customized package to cater for your brand promotion. 3. Our JY BRAND packages( As below picture shows)
Payment Terms:
30%TT deposit, the balance should be paid before shipment.
Delivery Date:
1. Stocks. 3-7 days. 2. 15-25 days for LCL shipment. 3. 25-45 days for FCL shipment.
Sample:
Charged, after place the order, we will return the sample fee.
Business Line:
Various types and different car models supplied.
Our Special Service and Advantage:
Testing:
Factory QA test, before shipment, we will take each product video or pictures for final comfirmation.
Complaint:
Definitely exist. We got long-term business with customers many years due to our responsible to customers requirements and responce. If have, within 24 hours for solutions. VIP service online contact. If complaint, for our party, we will compensate your loss and make replacement a.s.a.p.
Service:
Small order or sample order are acceptable. One to One online business contact.
Trading Experience:
Many years export experience, willing to help develop your new markets.
Sertificate:
ISO Syestem and TS16949
Sea Port Available:
HangZhou Port or any china sea port are accept.
JIAYI Supply auto parts for below: Japanese car: Honda,Toyota,Nissan,Mazda,Subaru,Mitsubishi,Suzuki,Isuzu; European car: Renault,Peugeot,Citroen,Fiat,Opel,BMW,Benz,VW,Audi,Skoda,Land Rover American car: Ford,Chrysler Korean car: Hyundai,Kia,Daewoo
We are leading supplier for below auto parts: Engine mounting/Transmission mount Strut Mount/Silent block Control arm/wishbone/suspension arm Brake system parts Body parts. Stabizer link /tie rod end/rack end/ball joint Air hose/cv boot Bushing ect…
What Is a V-Belt?
A v-belt is a type of belt that provides a continuous motion to the vehicle’s wheels. This type of belt is made of several different components. They usually have a trapezium-shaped cross-section because of its elastomer core. Elastomers are often made of polyurethane or a synthetic rubber with good shock resistance. Sometimes, a v-belt will have 2 sections – cushion rubber and compression rubber.
Link-type V-belt
A laminated link-type V-belt is 1 embodiment of the present invention. The belt comprises individual lamina sections connected longitudinally by studs and tubes, each of which has at least 1 connecting means. The slots in the links allow for a full share of the load to be transferred through the belt, and they also reduce substantially all internal mechanical stresses. The belt is preferably designed to extend substantially the entire width of the machine being driven. Conventional link-type V-belts are installed between 2 pulleys on the tight side of the V-drive. A wide end of a link moves in the direction of rotation, while the stud of a second, smaller link pulls the nose end of the third link forward. The shank of the stud pivots on a solid fabric located in hole 2 of the third link below. The bottom link, however, curls over the stud and the belt is assembled. The present invention offers an improved method of forming a link-type V-belt. The belt is manufactured using links and does not have to be fitted as tightly as conventional link-type V-belts. This belt is flexible and strong enough to handle normal tension loads in a well-designed drive. In addition, the belts made using the present invention will have a longer life, thereby extending the drive’s load-carrying capacity.
Classical V-belt
A classical trapezoidal belt profile makes the VB Classical V-belt ideal for various industrial applications. Available in small sizes from 5mm to 3mm, these belts are available with cogged or raw edges. Their highly engineered construction makes them ideal for a variety of uses. These belts are commonly used in motors, compressors, milling machines, mixers, and other mechanical devices. To determine the right belt for your application, consider the following factors. The classic v-belt is the most common and economically-priced type of v-belt. They are manufactured using special formulated rubber reinforced with polyester cords. These belts can span from 16 inches to 400 inches in length. The classic V-belt is also very easy to replace. The belt’s outer diameter and pitch can be measured. The length is typically standardized by the Association for Rubber Product Manufacturers. Typically, classical V-belts are used in single-belt drives. Because they don’t require lubrication or maintenance, these belts are often available in sizes A and B. However, larger belt sizes are rarely used for single-belt drives. In such cases, multiple A or B belts are an economical alternative to single-belt C. In addition, narrower-profile V-belts provide higher power ratings than conventional V-belts because of their higher depth-to-width ratio. These belts are ideal for heavy-duty applications.
Narrow V-belt
The narrow v-belt is the same as a conventional v-belt, but it has a smaller top and bottom width. This makes it suitable for higher horsepower applications, and it is used in high-end sports cars. Narrow v-belts are generally characterized by a letter “v” on the top side and a length of outside dimensions of 1.6:1. The steel wires that comprise the core of the v-belt are endless and are free of joints. This provides the strength required for torque transmission. A base rubber compound is placed around the steel wire and acts as a medium of compression and shock absorption during power transmission. A plastic layer acts as a protective cover, and provides the rubber with a degree of temperature tolerance. While choosing a narrow v-belt, it is important to keep in mind that there are some disadvantages to a narrow V-belt. For example, a narrow V-belt is suitable for high-power applications, and may be used in a small assembly space. Its narrow profile also allows it to be space-saving in layout and allows high-speed drives without additional belts. Furthermore, it reduces operating and maintenance costs. It is ideal for applications where space is limited, and a high torque is required. The benefits of a narrow V-belt are plentiful.
Banded belt
Identifying a banded v-belt can be tricky, but there are a few signs that can indicate a possible problem. Cracked belts can be difficult to spot, but they can be an early indicator of a more serious problem. Look for cracked underside edges, worn covers, and misplaced slack. If 1 or more of these factors applies to your belt, you may want to seek a replacement. Banded v-belts are made with an elastomer core. The main component of this belt is the elastomer, which is used for the band’s flexural strength and shock resistance. It’s sometimes separated into 2 sections, with each section connected to the other by a tension cord. This gives the belt its trapezium cross-section, which increases tensile strength. The 2 main types of banded v-belts are wrapped or raw edge. Wrapped v-belts have a fiber-covered body while raw edge belts are uncovered. Banded v-belts are often classified by their cross-section, and include: standard v-belt, wedge v-belt, narrow versus double v-belt, cogged v-belt, and double t-belt. Banded v-belts are popular with commercial applications. Whether you’re looking for a 2V-belt or a large 8V-belt, V-Belt Guys has what you need. We also stock a wide variety of different banded v-belts and can help you find 1 that fits your needs and budget. Take a look at our selection today!
Traditional V-belt
Although a traditional V-belt may be a glorified rubber band, modern variations reflect advances in engineering. Proper installation and maintenance are essential for trouble-free service. When you are replacing a traditional V-belt, be sure to follow these simple steps to ensure its longevity. Read on to learn more. Listed below are the features of each type of V-belt. Identify the type of belt you need by measuring its top width, circumference, and dimensions. TEC Traditional V-belts have an exceptionally low slip rate and are resistant to high operating temperatures. These types of belts do not experience early belt aging. They are also highly resistant to poor operating conditions. However, the maintenance is more extensive than other types of belts. A typical V-belt part number is B50, which is the cross-section size of a 50-inch belt. The belt’s lifespan is greatly increased because of this feature. A ribbed V-belt is another option. It has a deeper V than a traditional V-belt. The ribs in this type are narrower and more flexible. These ribs are smaller than the classic V-belt, but they can transmit 3 times as much horsepower. Because they are thinner, these belts are more flexible than traditional V-belts. The thickness of the ribs is less critical.
Metric V-belt
Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you’re in the market for a new belt, consider ordering a metric one.Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you’re in the market for a new belt, consider ordering a metric one. Metric V-belts are generally more durable than their equivalents made of standard American-sized belts. Metric V-belts are available in many different sizes to fit different machineries. In addition to offering superior load-carrying capacity, Metric Power(tm) V-belts are known for their exceptional flex and stretch characteristics. For optimum performance in textile mills, food processing, and machine tool applications, Metric Power(tm) V-belts are manufactured using a proprietary construction that combines a higher load-carrying capacity with superior flex and stretch. Metric belts can generate 50% to 100% more horsepower than conventional and classic sectioned belts. This is achieved through improved construction and placement of the cord line. These belts also have unique wedge designs that help them support the cord in motion. However, you must ensure the proper tension when buying a Metric V-belt, because improper tension may damage the belt. They are compatible with both U.S. and international standards.
V-Ribbed Belt Tensioner/Idler Pulley () for Vauxhall/Opel Astra Vectra
Item specifics:
Brand:
YB
Manufacturer Part NO.:
0115D7011
Delivery Time:
30 Days
Warranty:
1 Year or 50000 KM
Port Of Shipment
HangZhou Or ZheJiang Port, China
Package:
Neutral box, Customized box
Car Model:
Opel
Reference OEM:
VKM25152
9128739
5636416
V55312
T42077
532003310
5535 0571
9 0571 730
96413863
5636426
5536455
5636455
9 0571 739
Application:
Model
Engine
Displacement
Power
Hp
Type
Year
OPELCOMBO (71_)
(1994/07 – 2001/10)
OPELCORSA B (73_, 78_, 79_)
(1993/03 – 2002/12)
OPELASTRA F (56_, 57_)
(1991/09 – 1998/09)
OPELASTRA F Convertible (53_B)
(1993/03 – 2001/03)
OPELASTRA F Hatchback (53_, 54_, 58_, 59_)
(1991/09 – 1998/01)
OPELVECTRA B Hatchback (38_)
(1995/10 – 2003/07)
OPELVECTRA B (36_)
(1995/09 – 2002/04)
OPELVECTRA B Estate (31_)
(1996/11 – 2003/07)
OPELASTRA G Hatchback (F48_, F08_)
(1998/02 – 2009/12)
OPELASTRA G Estate (F35_)
(1998/02 – 2009/12)
OPELASTRA F Estate (51_, 52_)
(1991/09 – 1998/01)
OPELTIGRA (95_)
(1994/07 – 2000/12)
OPELASTRA G Saloon (F69_)
(1998/09 – 2009/12)
OPELZAFIRA A (F75_)
(1999/04 – 2005/06)
OPELASTRA G Coupe (F07_)
(2000/03 – 2005/05)
OPELCORSA C (F08, F68)
(2000/09 – 2009/12)
OPELASTRA F CLASSIC Saloon
(1998/01 – 2002/08)
OPELASTRA F CLASSIC Hatchback
(1998/01 – 2002/08)
OPELASTRA F CLASSIC Estate
(1998/01 – 2005/01)
OPELASTRA G Convertible (F67)
(2001/03 – 2005/10)
OPELCOMBO Box Body / Estate
(2001/10 – /)
OPELVECTRA C
(2002/04 – /)
OPELVECTRA C GTS
(2002/08 – /)
OPELMERIVA
(2003/05 – 2571/05)
OPELSIGNUM
(2003/05 – /)
OPELCOMBO Tour
(2001/10 – /)
OPELVECTRA C Estate
(2003/10 – /)
OPELASTRA H (L48)
(2004/03 – /)
OPELASTRA H Estate (L35)
(2004/08 – /)
OPELTIGRA TwinTop
(2004/06 – /)
OPELASTRA H GTC (L08)
(2005/03 – /)
OPELZAFIRA B (A05)
(2005/07 – /)
OPELASTRA H TwinTop (L67)
(2005/09 – /)
SAAB9-3 (YS3F)
(2002/09 – /)
SAAB9-3 Estate (YS3F)
(2005/03 – /)
VAUXHALLASTRA Mk III (F) Hatchback
(1991/09 – 1998/02)
VAUXHALLASTRA Mk III (F) Estate
(1991/03 – 1998/02)
VAUXHALLCORSA Mk I (B)
(1992/12 – 2000/09)
VAUXHALLTIGRA Mk I (F07)
(1994/07 – 2000/12)
VAUXHALLVECTRA (B)
(1995/08 – 2002/03)
VAUXHALLVECTRA (B) Hatchback
(1995/08 – 2003/07)
VAUXHALLVECTRA (B) Estate
(1995/08 – 2002/03)
VAUXHALLASTRA Mk IV (G) Hatchback
(1998/02 – 2005/05)
VAUXHALLASTRA Mk IV (G) Saloon
(1998/02 – 2005/05)
VAUXHALLASTRA Mk IV (G) Estate
(1998/02 – 2005/05)
VAUXHALLASTRA Mk III (F)
(1991/09 – 1998/09)
VAUXHALLASTRA Mk III (F) Convertible
(1993/03 – 2001/03)
VAUXHALLZAFIRA Mk I (A) (F75)
(1998/11 – 2005/08)
VAUXHALLASTRA Mk IV (G) Coupe (F67)
(2000/03 – 2005/08)
VAUXHALLCORSA Mk II (C) (W5L, F08)
(2000/08 – 2006/10)
VAUXHALLASTRA Mk IV (G) Convertible
(2001/03 – 2005/10)
VAUXHALLCOMBO Mk II (C) Box Body / Estate (F25)
(2001/09 – 2012/02)
VAUXHALLVECTRA Mk II (C)
(2000/01 – 2008/10)
VAUXHALLVECTRA Mk II (C) GTS
(2002/08 – 2008/07)
VAUXHALLSIGNUM
(2003/03 – 2008/10)
VAUXHALLMERIVA Mk I (A)
(2003/01 – 2571/06)
VAUXHALLASTRA Mk V (H) Hatchback
(2004/01 – 2009/09)
VAUXHALLVECTRA Mk II (C) Estate
(2003/10 – 2008/07)
VAUXHALLTIGRA TwinTop
(2004/06 – 2009/08)
VAUXHALLASTRA Mk V (H) Estate
(2004/08 – 2571/10)
VAUXHALLASTRA Mk V (H) Sport Hatch
(2005/02 – 2571/11)
VAUXHALLCOMBO TOUR Mk II (C) (F25)
(2001/09 – 2012/02)
Company Details: HangZhou CZPT Auto Parts Industry Co., Ltd is a family owned company, established in 2005. As a real, direct and professional manufacture in China, CZPT has grown to become 1 of greatest manfacturer and exporter in Performance parts, include intake system, exhaust system, cooling system, interior&exterior parts etc. We own a factory located in HangZhou, HangZhou, which has 8000 square meter, tens of machine, 150 workers, 15 person sales tean, 5 R&D department. Our customers cover North American, South American, Asia, Middle east and Europe. We export the millions of USD per year. Looking forward to have a nice cooperation with you
Why Choose YiBai? It’s simple. The YiBai Company is built on delivering more Quality, Reliability, and Value than any other manufacturer. Whether supplying the world’s automakers with reliable OE parts, or developing aftermarket replacement parts at or above spec, YiBai’s line of products are built to deliver superior all-around performance every day.
Aftermarket Parts Built At or Above Specification The quality of YiBai parts is guaranteed because every component that leaves a YiBai factory has been designed with precision, manufactured to the strictest OE standards or above, and subjected to rigorous safety and performance tests. In the end, it all comes down to quality – that’s what the YiBai name stands for. Measure Everything for a First Time Fit Our First Time Fit philosophy attracts attention throughout the automotive world, while our commitment to pushing technology into the future and continually sets us apart around the globe.First Time Fit is a promise that YiBai makes to the aftermarket, by providing products that are OE grade or better – and fits the first time. Our Service 1. OEM Manufacturing welcome: Product, Package… 2. Sample order 3. We will reply you for your inquiry in 24 hours. 4. After sending, we will track the products for you once every 2 days, until you get the products. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solve way for you. FAQ Q1. What is your terms of packing? A: Generally, we pack our goods in neutral white boxes and brown cartons. If you have legally registered patent, we can pack the goods in your branded boxes after getting your authorization letters. Q2. What is your terms of delivery? A: EXW, FOB CIF, DDU. Q3. How about your delivery time? A: Generally, it will take 15 to 20 days after receiving your advance payment. The specific delivery time depends on the items and the quantity of your order. Q4. What is your sample policy? A: We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.
What Is a V-Belt?
A v-belt is a type of belt that provides a continuous motion to the vehicle’s wheels. This type of belt is made of several different components. They usually have a trapezium-shaped cross-section because of its elastomer core. Elastomers are often made of polyurethane or a synthetic rubber with good shock resistance. Sometimes, a v-belt will have 2 sections – cushion rubber and compression rubber.
Link-type V-belt
A laminated link-type V-belt is 1 embodiment of the present invention. The belt comprises individual lamina sections connected longitudinally by studs and tubes, each of which has at least 1 connecting means. The slots in the links allow for a full share of the load to be transferred through the belt, and they also reduce substantially all internal mechanical stresses. The belt is preferably designed to extend substantially the entire width of the machine being driven. Conventional link-type V-belts are installed between 2 pulleys on the tight side of the V-drive. A wide end of a link moves in the direction of rotation, while the stud of a second, smaller link pulls the nose end of the third link forward. The shank of the stud pivots on a solid fabric located in hole 2 of the third link below. The bottom link, however, curls over the stud and the belt is assembled. The present invention offers an improved method of forming a link-type V-belt. The belt is manufactured using links and does not have to be fitted as tightly as conventional link-type V-belts. This belt is flexible and strong enough to handle normal tension loads in a well-designed drive. In addition, the belts made using the present invention will have a longer life, thereby extending the drive’s load-carrying capacity.
Classical V-belt
A classical trapezoidal belt profile makes the VB Classical V-belt ideal for various industrial applications. Available in small sizes from 5mm to 3mm, these belts are available with cogged or raw edges. Their highly engineered construction makes them ideal for a variety of uses. These belts are commonly used in motors, compressors, milling machines, mixers, and other mechanical devices. To determine the right belt for your application, consider the following factors. The classic v-belt is the most common and economically-priced type of v-belt. They are manufactured using special formulated rubber reinforced with polyester cords. These belts can span from 16 inches to 400 inches in length. The classic V-belt is also very easy to replace. The belt’s outer diameter and pitch can be measured. The length is typically standardized by the Association for Rubber Product Manufacturers. Typically, classical V-belts are used in single-belt drives. Because they don’t require lubrication or maintenance, these belts are often available in sizes A and B. However, larger belt sizes are rarely used for single-belt drives. In such cases, multiple A or B belts are an economical alternative to single-belt C. In addition, narrower-profile V-belts provide higher power ratings than conventional V-belts because of their higher depth-to-width ratio. These belts are ideal for heavy-duty applications.
Narrow V-belt
The narrow v-belt is the same as a conventional v-belt, but it has a smaller top and bottom width. This makes it suitable for higher horsepower applications, and it is used in high-end sports cars. Narrow v-belts are generally characterized by a letter “v” on the top side and a length of outside dimensions of 1.6:1. The steel wires that comprise the core of the v-belt are endless and are free of joints. This provides the strength required for torque transmission. A base rubber compound is placed around the steel wire and acts as a medium of compression and shock absorption during power transmission. A plastic layer acts as a protective cover, and provides the rubber with a degree of temperature tolerance. While choosing a narrow v-belt, it is important to keep in mind that there are some disadvantages to a narrow V-belt. For example, a narrow V-belt is suitable for high-power applications, and may be used in a small assembly space. Its narrow profile also allows it to be space-saving in layout and allows high-speed drives without additional belts. Furthermore, it reduces operating and maintenance costs. It is ideal for applications where space is limited, and a high torque is required. The benefits of a narrow V-belt are plentiful.
Banded belt
Identifying a banded v-belt can be tricky, but there are a few signs that can indicate a possible problem. Cracked belts can be difficult to spot, but they can be an early indicator of a more serious problem. Look for cracked underside edges, worn covers, and misplaced slack. If 1 or more of these factors applies to your belt, you may want to seek a replacement. Banded v-belts are made with an elastomer core. The main component of this belt is the elastomer, which is used for the band’s flexural strength and shock resistance. It’s sometimes separated into 2 sections, with each section connected to the other by a tension cord. This gives the belt its trapezium cross-section, which increases tensile strength. The 2 main types of banded v-belts are wrapped or raw edge. Wrapped v-belts have a fiber-covered body while raw edge belts are uncovered. Banded v-belts are often classified by their cross-section, and include: standard v-belt, wedge v-belt, narrow versus double v-belt, cogged v-belt, and double t-belt. Banded v-belts are popular with commercial applications. Whether you’re looking for a 2V-belt or a large 8V-belt, V-Belt Guys has what you need. We also stock a wide variety of different banded v-belts and can help you find 1 that fits your needs and budget. Take a look at our selection today!
Traditional V-belt
Although a traditional V-belt may be a glorified rubber band, modern variations reflect advances in engineering. Proper installation and maintenance are essential for trouble-free service. When you are replacing a traditional V-belt, be sure to follow these simple steps to ensure its longevity. Read on to learn more. Listed below are the features of each type of V-belt. Identify the type of belt you need by measuring its top width, circumference, and dimensions. TEC Traditional V-belts have an exceptionally low slip rate and are resistant to high operating temperatures. These types of belts do not experience early belt aging. They are also highly resistant to poor operating conditions. However, the maintenance is more extensive than other types of belts. A typical V-belt part number is B50, which is the cross-section size of a 50-inch belt. The belt’s lifespan is greatly increased because of this feature. A ribbed V-belt is another option. It has a deeper V than a traditional V-belt. The ribs in this type are narrower and more flexible. These ribs are smaller than the classic V-belt, but they can transmit 3 times as much horsepower. Because they are thinner, these belts are more flexible than traditional V-belts. The thickness of the ribs is less critical.
Metric V-belt
Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you’re in the market for a new belt, consider ordering a metric one.Metric V-belts are made to a more precise standard than their American counterparts. These belts are manufactured to meet ARPM tolerances, making them suitable for industrial, machine, and food processing applications. This metric system is also more convenient than converting between the 2 units. Listed below are the most common uses for a Metric V-belt. If you’re in the market for a new belt, consider ordering a metric one. Metric V-belts are generally more durable than their equivalents made of standard American-sized belts. Metric V-belts are available in many different sizes to fit different machineries. In addition to offering superior load-carrying capacity, Metric Power(tm) V-belts are known for their exceptional flex and stretch characteristics. For optimum performance in textile mills, food processing, and machine tool applications, Metric Power(tm) V-belts are manufactured using a proprietary construction that combines a higher load-carrying capacity with superior flex and stretch. Metric belts can generate 50% to 100% more horsepower than conventional and classic sectioned belts. This is achieved through improved construction and placement of the cord line. These belts also have unique wedge designs that help them support the cord in motion. However, you must ensure the proper tension when buying a Metric V-belt, because improper tension may damage the belt. They are compatible with both U.S. and international standards.
FE-T031 Adjustable Auto Engine Belt Tensioner Pulley Magnum FH12 FM12 FM9 8149855 2571523 257160 20966526 2145718 21422767
OEM: 8149855 2571523 257160 20966526 2145718 21422767 Application: Magnum FH12 FM12 FM9 Other Ref.: Dayco: APV1117 APV24 Febi: 23328/30648 Gates:T38585
Tips For Replacing a Belt Tensioner
When replacing a serpentine belt or automatic tensioner, you will need a special tool. This tool has a long, flat extension handle that allows you to place a socket onto the bolt and flats on the tensioner arm. The following are some tips to follow when replacing the belt or tensioner on your vehicle. To replace your belt or tensioner, you should start by checking the tensioner’s lubrication.
Serpentine belt
If you notice that the power steering or air conditioning are not working, you should check the serpentine belt tensioner. A malfunctioning serpentine belt tensioner can lead to a host of other issues. The belt may stretch, which can be caused by several factors. Over time, serpentine belt tensioners can also get worn down. Additionally, they can have a variety of other problems, including rust or dirt in the housing. You can replace your serpentine belt by following the instructions found on your vehicle’s manual. Some tensioners attach to the engine via a single bolt. To remove and replace the belt, remove the old unit and the retaining bolt. Locate the locking pin in the engine and place the new tensioner over it. Use a torque wrench or hand tool to tighten the bolts. When installing the new tensioner, be sure to line up the mounting bolt holes with the mounting bolts. Once the tensioner is installed, test the tension by ensuring that the gauge is above the ribs. If it slides down, it is time to replace the tensioner. Before you begin the process of replacing your serpentine belt, be sure to park your vehicle in a level area. Turn off the engine and chock both rear wheels before starting the process. Using a diagram from your vehicle’s repair manual can make the process easier, especially if you are a beginner. You can draw it in your hand, or refer to a repair manual to find out the exact location of the tensioner pulley. If you notice that the belt is slipping or squealing while driving, it may be time to replace the serpentine belt tensioner. A worn-out belt can cause the belt to slip and can cause power steering, air conditioning, and alternator malfunctions. You should also check the belt tensioner regularly. The motor may stall or make a loud noise. These are all signs of worn-out serpentine belt. A serpentine belt uses less space in the engine than a V-belt. It also provides more tension for the serpentine belt, which prevents it from running hot and squealing. Serpentine belts are manufactured to last for several hundred thousand miles. They are a must-have item for your car! So be sure to keep it maintained and properly adjusted! Then, you can be sure to have your car running smoothly and safely. If you notice any of these symptoms, you should replace your serpentine belt tensioner. A serpentine belt tensioner is a simple self-10sioning device that is mounted on the front of the engine. These devices are usually easy to replace and are not complicated to install. You can find 1 at any parts store or online. When the time comes to replace your serpentine belt, don’t hesitate to get the parts you need from a local auto part store.
Idler pulley
The idler pulley and the belt tensioner are essential components of your car’s drivetrain. If any 1 of them fails, all of them must be replaced. This is because they were manufactured at the same time and most likely have the same number of miles on them. As a result, they can all fail within a few thousand miles of each other. Here are some of the symptoms that you should look for when inspecting your idler pulley or belt tensioner. Idler pulleys are a common part of most cars. They play a vital role in the operation of the belt system by directing the belt’s path and providing additional contact with the pulley. The idler pulley is also responsible for turning the cooling fan in an air-cooled Corvair engine. Because of these functions, idler pulleys are often replaced with idlers that differ in size. Idler pulleys are small, 2 to 4 inches in diameter and mounted on the front of the engine block. Their purpose is to create a constant amount of tension on the drive belt. When the idler pulley is worn out, the accessory drive belt may experience excessive vibration and squealing noises. You may wish to replace it as soon as possible. You can do so at AutoZone. A worn or damaged idler pulley will require a replacement. The belt itself will not fall off the car unless the idler pulley is damaged. A squealing sound can be a sign of a broken spring. Alternatively, a mechanic can recommend a replacement based on the condition of the idler pulley. In most cases, idler pulleys are more durable than the belts and are therefore recommended for replacement. You can also notice that the idler pulley is slipping or causing excessive noise. Its constant rotation wears the idler pulley and reduces the tension of the belt. This causes the belt to slip and may even tear off the engine. Ultimately, this could result in stalling. And if you notice the engine belt squealing or making excessive noises, you should consider replacing it. An idler pulley for a belt tensioner are often confused. Though both of them are used in the same application, they differ in many ways. The tensioner is the 1 that receives pressure from the belts and moves them. The idler pulley is not attached to an adjustable bolt, and it can cause unusual noises. It might even make squealing or odd noises.
Spring tensioner
A spring belt tensioner is a solution to a loose belt. It features a strong torsion spring that reduces slack. These devices are designed to fit up to 6mm wide belts. They are highly reliable and durable. They are also suitable for applications where the engine speed is often fluctuating. Here’s how you can choose the best 1 for your vehicle. The spring in the tensioner should be in the proper position to keep the belt taut and free of slippage. The RunRight tensioner is a durable, high-quality product that uses aluminum alloy. Its elastomeric inserts rely on highly elastic natural rubber for good shape memory and durability. Spring tensioners are easy to install and maintain. They are designed for both axial and helical drives. They feature detailed technical drawings and 3-D models to help you determine the best 1 for your application. To choose a spring tensioner, visit our website. A worn bushing in the tensioner pulley or a loose pivot arm can result in excessive noise, vibration, and premature belt failure. In addition, worn springs cannot maintain proper tension. Over time, they lose tension. The pulley arm itself can also become damaged, preventing it from rotating properly. If these problems occur, you’ll need to replace the spring tensioner. If you don’t see any signs of wear, check your mounting bracket and tensioner. A worn pivot bushing can cause the tensioner arm to misalign, leading to excessive back and forth sway. It may also cause the tensioner to jam, which means the belt is too long or too short. If you notice excessive wobble, you should replace the spring tensioner. A faulty tensioner may also be causing excessive oscillation in the pulley. To determine if the spring tensioner is too weak or jammed, check the belt’s length by using a breaker bar or socket with a long handle ratchet. When it’s time to replace your serpentine belt, don’t forget to replace the belt tensioner. The tensioner protects other components from premature failure. It is a relatively inexpensive repair. It should be replaced as part of a larger multi-ribbed belt. It also provides protection for other components of the drive system. In addition to its protection and performance, the tensioner is inexpensive and relatively easy to replace. It’s vital to check the tensioner and idler pulleys to make sure the system is aligned properly. If they don’t align, the belt will slip and cause premature wear. Alternatively, the tensioner may have too much tension, overloading the shaft bearings and causing premature failure in other parts. You should also check the idler pulleys for noise as well, since these are engine-driven accessories.
